SG-950 Datasheet, PDF (11/12 Pages) List of Unclassifed Manufacturers – SUPER HYPERABRUPT TUNING VARACTOR DIODES

VARACTOR DIODES
SG-950
MICROWAVE ABRUPT TUNING VARACTOR DIODES
Surface Mount Low Parasitic Package (SMLP)
FEATURES
• Mesa epitaxial silicon construction
• Silicon dioxide passivated
• Fits Footprint for SOD-323, SOD-123 and smaller
• High Frequency (VHF to 8 GHz)
• Available on carrier and reel
• Available in chip form (add suffix -000)
• Two package styles including lower cost, flat
top version
• Alternate notched termination version available,
contact factory for outline drawing
APPLICATIONS
• PCS
• WANS
• GSM
• TAGS
• Cellular
• AMPS
• DECT
SPECIFICATIONS
Reverse breakdown voltage at 10 µA DC
(at 25°C): 30 V min
Maximum reverse leakage current at –25 V
(at 25°C): 0.05 µA DC
Device dissipation at 25°C: 250 mW (derated
linearly to zero at +125°C)
Operating junction temperature: –65°C to +125°C
Storage temperature: –65°C to +125°C
Total
Capacitance
C_T (pF) at –4 V
(±10%)
0.8
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
Capacitance
Ratio
C_T at 0 V
C_T at –4 V
min
1.5
1.6
1.7
1.8
1.9
2.0
2.0
2.1
2.1
2.2
2.2
Capacitance
Ratio
C_T at –4 V
C_T at –30 V
min
1.45
1.55
1.60
1.65
1.70
1.75
1.80
1.85
1.90
1.95
2.00
* For complete model number, select “Dash No.” from chart below.
Q min
at –4 V
(50 MHz)
3900
3800
3700
3600
3500
3400
3300
3100
2700
2600
2500
Model
Number*
GVD91300 – _ _ _
GVD91301 – _ _ _
GVD91302 – _ _ _
GVD91303 – _ _ _
GVD91304 – _ _ _
GVD91305 – _ _ _
GVD91306 – _ _ _
GVD91307 – _ _ _
GVD91308 – _ _ _
GVD91309 – _ _ _
GVD91310 – _ _ _
TERMINATIONS (GOLD PLATED)
DOT INDICATES
CATHODE END
B
D TYP
BOTTOM VIEW
A
TOP VIEW
Dash
No.
A
B
C₁
C₂
D
- 011
- 111
0.10 0.050 0.035 0.050
2.5 1.3 0.89 1.3
0.015 ± 0.004
0.38 ± 0.1
- 012 0.12 0.060 0.035 0.050 0.020 ± 0.005
K
L
M
0.030 0.070 0.112
0.76 1.8 2.84
0.030 0.080 0.132
- 112 ^{3.0 1.5 0.89 1.3}
0.51 ± 0.1
0.76 2.0 3.35
EPOXY
K TYP
ENCAPSULANT
C1
- 013 0.200 0.100 0.035 0.050 0.020 ± 0.005 0.030 0.120 0.212
L
M
MOUNTING PAD LAYOUT
SIDE VIEW FOR - 01__
EPOXY
ENCAPSULANT
C2
SIDE VIEW FOR - 11__
- 113 5.08 2.54 0.89 1.3
0.51 ± 0.1
- 014 _{0.075 0.050 0.035 0.050}
- 114 ^{1.9 1.3 0.89 1.3}
0.015 ± 0.004
0.38 ± 0.1
- 015 0.062 0.042 0.030 0.050
- 115 ^{1.6 1.1 0.76 1.3}
0.011 ± 0.003
0.28 ± 0.08
0.76 3.05 5.38
0.030 0.070 0.087
0.76 1.8 2.2
0.020 0.060 0.072
0.51 1.5 1.8
All dimensions are in / mm. Unless otherwise specified, the tolerance on dimensions is ± 0.003/ 0.08.
Note: An SMLP package with three terminations sized to fit the pad layout for an SOT-23 package is also available. This
package can be used for multiple diode designs (such as common cathode or common anode). Contact factory
for the three-terminal SMLP outline drawing, and for further information on the multiple diode configurations.
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: [phone] • FAX: [phone] • E-MAIL: info@ spraguegoodman.com ₁₁