41713002X-3 Datasheet, PDF (11/18 Pages) List of Unclassifed Manufacturers – DVI-D INTERFACE CONTROLLER FOR 2560x1600 resolution TFT PANEL

CONTROLLER DIMENSIONS
The maximum thickness of the controller is 19.6mm (measured from bottom of PCB to top of components, including
any underside components & leads). We recommend clearances of:
• 5mm from bottom of PCB - if mounting on a metal plate we also recommend a layer of suitable insulation
material is added to the mounting plate surface.
• 10mm above the components
• 3~5mm around the edges
Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in diameter.
CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high
voltage parts such as the inverter.
11