MDM-51PCBRP Datasheet, PDF (10/17 Pages) List of Unclassifed Manufacturers – The Micro Line - .050" Contact Spacing

Micro-D Metal Shell - .050" Contact Spacing
MIL-C-83513
How to Order - ITT Cannon Part Number Nomenclature to MIL-C-83513 1
ITT CANNON SERIES
MDM - Metal Shell, Liquid Crystal Polymer (LCP)
MDB - Diallyl Phthalate Insulator
MDVB - Polyester Insulator
MD** 01 - H100 - * * * * * *
MIL-C-83513 SLASH SHEET
01 - Plug, Connector, Solderpot
02 - Receptacle, Connector, Solderpot
03 - Plug, Connector, Crimp Type
04 - Receptacle, Connector, Crimp Type
05 - Hardware Only ₇
06 - Plug, Connector, Solderpot
07 - Receptacle, Connector, Solderpot
08 - Plug, Connector, Crimp Type
09 - Receptacle, Connector, Crimp Type
} ^{Metal Shell}
} ^{Plastic 5}
INSERT ARRANGEMENT
METAL SHELL
A9 -
B15 -
C21 -
D25 -
E31 -
F37 -
G51 -
H100 -
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
100 Contact
PLASTIC
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
5
NOTES:
(Specify when ordering, if necessary.)
1 ^{- For every Mil-Spec P/N, ITT has one corresponding part numbers.}
Example: ITT P/N's MDM01-A9
2 - Tolerance on wire lengths-18", 36" and 72" long,
+1.00"/-0.00"
.5" and 1.00" + .200"/-.000"
3 - For space application, connector shell finish must be "A174"
and wire must be per MIL-W-22759/33-26.
4 - Any deviations to these P/N's will result in assignment of a special
P/N, consult factory.
5 ^{- No size 100 in plastic type connector.}
6 - Color coding in accordance with MIL-STD-681, System 1 except the
appropriate color code is the individual contact cavity number minus
1 for contact positions.
7 ^{- For mounting hardware to Military Specification (sizes 9 to 100) see}
page 238.
WIRE TYPE
No Number - For Solderpot
01 - 18" long, #26 AWG per MIL-W-22759/11-26-9
02 - 36" long, #26 AWG per MIL-W-22759/11-26-9
03 - 18" long, #26 AWG per MIL-W-22759/11-26
Color Coded per MIL-STD-681, System 1
04 - 36" long, #26 AWG per MIL-W-22759/11-26-
Color Coded per MIL-STD-681, System 1
05 - .5" long. #25 AWG, type S per QQ-W-343,
Gold Plated
06 - 1.0" long, #25 AWG, type S per QQ-W-343,
Gold Plated
07 - _{.5" long, #25 AWG, type S per QQ-W-W-343,}
Tin Plated
08 - _{1.0" long, #25 AWG, type S per QQ-W-343,}
09 -
10 -
11 -
Tin Plated
18" long, #26 AWG per MIL-W-22759/33-26-9
36" long, #26 AWG per MIL-W-22759/33-26-9
18" long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1
12 - _{36" long, #26 AWG per MIL-W-22759/33-26}
13 -
14 -
Color Coded per MIL-STD-681, System 1
72" long, #26 AWG per MIL-W-22759/11-26-9
72" long, #26 AWG per MIL-W-22759/11-26
15 -
16 -
Color Coded per MIL-STD-681, System 1
72" long, #26 AWG per MIL-W-22759/33-26-9
72" long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1
SHELL FINISH
No number - for plastic type connector
No number - for Cadmium
A174 - Electroless Nickel
3
6
6
3
3
36
36
6
3
36
Qualification to slash sheets 10 thru 27 for the PCB connector will be announeced when completed.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
240