FNA41560B2 Datasheet, PDF (10/16 Pages) List of Unclassifed Manufacturers – UL Certified No. E209204, Isolation Rating of 2000 Vrms / min

Mechanical Characteristics and Ratings
Parameter
Device Flatness
Mounting Torque
Weight
Conditions
Note Figure 9
Mounting Screw: - M3
Note Figure 10
Recommended 0.7 N • m
Recommended 7.1 kg • cm
Min.
0
0.6
6.2
-
Limits
Typ.
-
0.7
7.1
11
Max.
+ 120
0.8
8.1
-
Unit
mm
N•m
kg • cm
g
Figure 9. Flatness Measurement Position
Pre - Screwing : 1→2
Final Screwing : 2→1
2
1
Note:
9. Do not make over torque when mounting screws. Much mounting torque may cause ceramic cracks, as well as bolts and Al heat - sink destruction.
10. Avoid one side tightening stress. Figure 10 shows the recommended torque order for mounting screws. Uneven mounting can cause the ceramic substrate of the Motion SPM
45 product to be damaged. The Pre - Screwing torque is set to 20 ~ 30% of maximum torque rating.
Figure 10. Mounting Screws Torque Order
©2011 Fairchild Semiconductor Corporation
10
FNA41560 / FNA41560B2 Rev. C1
www.fairchildsemi.com