EFM32GG995 Datasheet, PDF (10/72 Pages) List of Unclassifed Manufacturers – EFM32GG995 DATASHEET

Preliminary
...the world's most energy friendly microcontrollers
3 Electrical Characteristics
3.1 Test Conditions
3.1.1 Typical Values
The typical data are based on T_AMB=25°C and V_DD=3.0 V, as defined in Table 3.2 (p. 10) , by simu-
lation and/or technology characterisation unless otherwise specified.
3.1.2 Minimum and Maximum Values
The minimum and maximum values represent the worst conditions of ambient temperature, supply volt-
age and frequencies, as defined in Table 3.2 (p. 10) , by simulation and/or technology characterisa-
tion unless otherwise specified.
3.2 Absolute Maximum Ratings
The absolute maximum ratings are stress ratings, and functional operation under such conditions are
not guaranteed. Stress beyond the limits specified in Table 3.1 (p. 10) may affect the device reliability
or cause permanent damage to the device. Functional operating conditions are given in Table 3.2 (p.
10) .
Table 3.1. Absolute Maximum Ratings
Symbol
T_STG
T_S
Parameter
Condition
Min
Typ
Storage temperature range
-40
Maximum soldering tem-
perature
Latest IPC/JEDEC J-STD-020
Standard
Max
Unit
150¹ °C
260 °C
V_DDMAX
External main supply volt-
age
0
3.8 V
V_IOPIN
Voltage on any I/O pin
-0.3
V_DD+0.3 V
1_{Based on programmed devices tested for 10000 hours at 150ºC. Storage temperature affects retention of preprogrammed cal-}
ibration values stored in flash. Please refer to the Flash section in the Electrical Characteristics for information on flash data re-
tention for different temperatures.
3.3 General Operating Conditions
3.3.1 General Operating Conditions
Table 3.2. General Operating Conditions
Symbol
T_AMB
V_DDOP
f_APB
f_AHB
Parameter
Ambient temperature range
Operating supply voltage
Internal APB clock frequency
Internal AHB clock frequency
Min
Typ
-40
1.85
Max Unit
85 °C
3.8 V
48 MHz
48 MHz
2012-09-11 - EFM32GG995FXX - d0080_Rev1.00
10
www.energymicro.com