DT043BTFT Datasheet, PDF (10/13 Pages) List of Unclassifed Manufacturers – LCD Module Product Specification

Displaytech Ltd _{LCD MODULE DT043BTFT / DT043BTFT-TS Version: 1.3}
Note 1: The data are measured after LEDs are turned on for 5 minutes. LCM displays full white.
The brightness is the average value of 9 measured spots. Measurement equipment PR-705 (Φ8mm)
Measuring condition:
- Measuring surroundings: Dark room.
- Measuring temperature: Ta=25°C.
- Adjust operating voltage to get optimum contrast at the center of the display.
Measured value at the center point of LCD panel after more than 5 minutes while backlight turning on.
Note 2:
The luminance uniformity is calculated by using following formula.
ΔBp = Bp (Min.) / Bp (Max.)×100 (%)
Bp (Max.) = Maximum brightness in 9 measured spots
Bp (Min.) = Minimum brightness in 9 measured spots.
W/6
W/3
W/3
Measurement equipment PR-705 (Φ8mm)
Note 3: The definition of viewing angle:
Refer to the graph below marked by θ and Ф
9