ZE-10 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – ZigBee OEM module, ProBee-ZE10

ZigBee OEM module,
ProBee-ZE10
Features
· Fully supports ZigBee 2007 / ZigBee Pro stack
· Integrated 2.4GHz, IEEE 802.15.4-compliant coprocessor
· Various antenna options according to users' requirement,
up to 1.6km (1 mile) with optional 5 dBi dipole antenna
· UART Signals Support
· 4 Analog Inputs, 13 Digital Inputs/Outputs
· Supports remote management features wirelessly
such as firmware upgrade and system configuration by
using modem AT command set
· Easy to use Windows configuration tool available
Pin Assignment
The ProBee-ZE10 is an all-in-one ZigBee OEM module
with integrated ZigBee core and radio/antenna circuits together
with high level software library so OEM manufacturers can easily
and cost effectively integrate ZigBee functionality into target
products in timely manner.
The ZE10 OEM module is designed to meet specific requirements
to low cost and low power wireless applications such as Home
Automation, Smart Energy, Health care, Building Automation
and Telecom Services by adopting the ZigBee technology. The
ZE10 is based on the Ember EM250 ZigBee core and certified by
ZigBee alliance based on ZigBee 2007 and ZigBee Pro stack.
Despite of its low cost and low power consumptions, the ZE10
provides high performance and robust data transfer capability for
wide range of applications. The ZE10 can transfer data at up to
250 kbps and reach up to 1.6 km (1 mile) outdoor line-of-sight.
NO Pin Assignment
1 GND
2 NC
3 GPIO_1
4 GPIO_2
5 GPIO_0
6 Factory Reset
7 GPIO_3 / ADC_0
8 GPIO_4 / ADC_1
9 H/W RESET
10 GPIO_5 / ADC_2
11 GPIO_6 / ADC_3
12 +3V3
13 NC
14 GND
www.sena.com
Pin Assignment NO
GND
28
NC
27
NC
26
NC
25
GPIO_7
24
GPIO_9 / RTS
23
GPIO_8 / CTS
22
UART_TXD
21
UART_RXD
20
GPIO_10 / DTR 19
GPIO_11 / DSR 18
GPIO_12
17
GND
16
GND
15