YC-692R Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Crimping tools

5-A
Hand tools
Crimping tools
for chain terminals
YRS
series
YC
series
Hand tools
for loose piece terminals
YRM
series
YRF
series
Terminals and parts model
number in alphabetical order
Dimensions:
(W x L) 59X224mm (2.3" x 8.8")
Dimensions:
(W x L) 70X296mm (2.8" x 11.7")
Dimensions:
(W x L) 59X224mm (2.3" x 8.8")
Dimensions:
(W x L) 70X295mm (2.8" x 11.6")
80X305mm (3.1" x 12.0")
Note: (1) These tools are for prototype tooling or repair.
(2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies.
Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the
applicable wires described in this catalog may not be crimped properly.
Before use, check for proper crimping (such as tensile strength, terminal/contact deformation).
(3) These tools are not applicable to 2-wire crimping.
(4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of
the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable.
(5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools.
YRS series
YC series
YRM series
YRF series
CN-SAP/S1
YRS-870
–
–
–
JK-SP2***
YRS-370
–
–
–
JK-SS2***
YRS-370
–
–
–
J-SP1***
YRS-440
YC-440
–
–
J-SS1***
YRS-440
YC-440
–
–
J-SP2***
YRS-330
–
–
–
J-SS2***
YRS-330
–
–
–
LFO-1.0-250N
–
–
–
–
LFO-2.5-250N
–
–
–
–
MD-SP12**
YRS-470
–
–
–
MD-SP22**
YRS-460
–
–
–
RA-SC1290
YRS-231
YRM-232
(for AWG #26, #24)
–
YRM-233
–
(for AWG #24, #22)
RF-SC22**
–
–
YRM-230
–
RPJ-SP/SS2331
YRS-331
–
–
–
UBB-SP1110
YRS-951
–
–
–
UBB-SP2110
YRS-950
–
–
–
SAA-21(T)-**
–
YC-141
–
–
SAA-50(T)-**
–
YC-182
–
–
SAA-51(T)-**
–
YC-142
–
–
SAB-51(T)-**
–
YC-142
–
–
SAGH-002GU-P0.3
YRS-858
–
–
–
SAN-002T-0.8A
YRS-220
–
–
–
SAN-002T-0.8K
YRS-220
–
–
–
SBH-001T-P0.5
–
YC-670R
–
–
SBHL-002T-P0.5
YRS-857
–
–
–
SBHM-001T-P0.5
–
YC-670R
–
–
SBHS-002T-P0.5A
YRS-852
–
–
–
SBHSM-002T-P0.5
YRS-854
–
–
–
934
Hand tools
for loose piece terminals
Crimping tools
Extraction and Insertion tools
Extraction tool
Insertion tool
WC & JUC series
JUK's Hand Tools
–
–
–
–
–
–
–
JUCS-FO
JUCS-FO
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WC-670
–
–
–
–
Extraction tool is used to extract
contacts improperly inserted in the housing.
Terminal in loose form
model No.
–
–
–
KEJ-0.7
–
KEJ-0.4
J-BP1***
DEJ-0.3
J-BP1***
DEJ-0.3
–
DEJ-0.3
–
DEJ-0.3
–
–
–
–
–
MEJ-06
–
MEJ-06
RA-BC12**
EJ-RA
RF-BC22**
–
–
–
–
–
–
–
LAA-21(T-)**
–
LAA-50(T)-**
–
LAA-51(T)-**
–
LAB-51(T)-**
–
–
–
–
EJ-PH
–
EJ-PH
BBH-001T-P0.5
–
–
–
BBHM-001T-P0.5
–
–
–
–
–
Insertion tool allows contacts be inserted
in the housing.
This tool greatly increases efficiency especially
when thin wires are used.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
935