WT6621 Datasheet, PDF (1/15 Pages) List of Unclassifed Manufacturers – Dual USB Power Control Switch

WT6621
Dual USB Power Control Switch
GENERAL DESCRIPTION
The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered
Universal Serial Bus (USB) applications. Few external components are necessary to satisfy
USB requirements. With independent enable and error flag functions, the WT6621 can ease
control the supplied power conditions of USB down stream; each switch channel can supplies
up to 500mA to downstream devices; the switch low on-resistance meets USB voltage drop
requirements; fault current is limited to typically 750mA, and a flag output is available to
indicate fault conditions to the local USB controller. Additional features include thermal
shutdown to prevent switch failure from high-current loads, undervoltage lockout (UVLO) to
ensure there is a valid input voltage present, and 3.3V and 5V logic compatible enable inputs.
FEATURES
! Compliant to USB specifications
! Max. Continuous load current: 500mA
! 140mΩ maximum on-resistance per channel.
! 110uA typical on-state supply current
! 1uA typical off-state supply current
! Enable input is compatible with both 3V and 5V Logic
! Logic Over current output
! Undervoltage lockout
! Short Circuit Protection
! Thermal Shutdown
! Active-high or active-low enable versions
! 12KV output, 6KV input ESD protection.
! Packages: 8pin SOIC and 8pin DIP
Applications
! USB host and Self-power hubs
! USB bus-powered hub
! General purpose power switch applications
Version1.0
Weltrend Semiconductor, Inc. All Rights Reserved


27 March, 2000