WT12-A-AI Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps

WT12 Bluetooth® Module™ ^Description
WT12 is a next-generation, class 2, Bluetooth 2.1 +
EDR module. It introduces three times faster data rates
compared to the existing Bluetooth 1.2 modules even with
a lower power consumption. WT12 is a highly integrated
and sophisticated Bluetooth module, containing all the
necessary elements from Bluetooth radio antenna to
a fully implemented protocol stack. Therefore WT12
provides an ideal solution for developers who want
to integrate Bluetooth wireless technology into their
designs with limited knowledge of Bluetooth and RF
technologies.
Key Features
Bluetooth Class 2
Integrated chip antenna
Enhanced Data Rates (EDR) with data throughput up
to 2-3Mbps
Support for Adaptive Frequency Hopping (AFH) and
802.11 co-existence
USB version 2.0
UART with bypass mode
8Mbits of flash memory
Supported Bluetooth profiles: SPP, DUN, OBEX OPP,
HFP v.1.5, DID, HID + HCI
Industrial temperature range from -40°C to +85°C
RoHS compliant
WT12 module combined with Bluegiga’s complete
development, testing and verification services and
excellent developer support, OEMs and designers ensure
that their products reach the market rapidly and cost-
efficiently in relation to time and resources. Bluegiga
has extensive in-house knowledge of both software and
hardware offering customers a single point of contact to
all Bluetooth related issues.
By default WT12 module is equipped with powerful and
easy-to-use iWRAP firmware. iWRAP enables users
to access Bluetooth functionality with simple ASCII
commands delivered to the module over serial interface.
Entering the world of Bluetooth wireless technology
could not be easier!
With iWRAP software you have several implementation
options:
iWRAP can be configured to operate autonomously,
- as a Bluetooth cable replacer
To create sophisticated applications - a host system
can be used to control iWRAP with ASCII commands
With The GPIO interface in WT12 module can be used
to connect host and iWRAP
Pin-to-pin compatible with WT11 module
Simple iWRAP™ firmware for controlling Bluetooth
wireless technology
Fully qualified end product with Bluetooth 2.1 + EDR,
CE and FCC
Besides the iWRAP firmware Bluegiga also offers several
other firmware options for WT12 module. Standard Host
Command Interface (HCI) firmware is supported and
an ideal solution for systems where the host system
is capable of running the entire Bluetooth stack and
profiles and WT12 is utilized as the physical radio over
UART or USB interface.