WT11-E-AI Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – WRAP THOR WT11 Bluetooth ® Module

WRAP THOR
WT11 Bluetooth ® Module
Key Features
Bluetooth® Class 1
Two antenna options: integrated chip antenna or U.FL
connector
Enhanced Data Rates (EDR) with data throughput up to
2-3Mbps
Support for Adaptive Frequency Hopping (AFH) and 802.11
co-existence
USB version 2.0
UART with bypass mode
8Mbits of external flash
Supported profiles: SPP, DUN, OBEX and HCI
Support for custom applications
Industrial temperature range from -40C to +85C
RoHS compliant
Simple iWRAP™ firmware for controlling Bluetooth®
wireless technology
Fully qualified end product with Bluetooth® 2.0+EDR, CE
and FCC
Description
WT11 is a next-generation, class 1, Bluetooth® 2.0+EDR
(Enhanced Data Rates) module. It introduces three times
faster data rates compared to existing Bluetooth® 1.2
modules even with lower power consumption! WT11 is a
highly integrated and sophisticated Bluetooth® module,
containing all the necessary elements from Bluetooth®
radio to antenna and a fully implemented protocol stack.
Therefore WT11 provides an ideal solution for developers
who want to integrate Bluetooth® wireless technology into
their design with limited knowledge of Bluetooth® and RF
technologies.
WT11 module combined with Bluegiga's complete
development, testing and verification service offering and
excellent developer support, OEMs and designers ensure
that their products reach the market rapidly and cost-
effectively in relation to time and resources. Bluegiga has
extensive in-house knowledge of both software and
hardware offering customers a single point of contact to
all Bluetooth® related issues.
By default WT11 module is equipped with powerful and
easy-to-use iWRAP firmware. iWRAP enables users to
access Bluetooth® functionality with simple ASCII
commands delivered to the module over serial interface -
it's just like a Bluetooth® modem. Entering the world of
wireless Bluetooth® technology could not be easier!
With iWRAP software you have several implementation
options:
iWRAP can be configured to operate autonomously -
just like a Bluetooth® cable replacer
To create sophisticated applications - a host system can
be used to control iWRAP with ASCII commands
The GPIO interface in WT11 module can be used to
connect host and iWRAP
Besides the iWRAP firmware Bluegiga also offers several
other firmware options for WT11 module. Standard Host
Command Interface (HCI) firmware is supported and an
ideal solution for systems where the host system is capable
running the entire Bluetooth® stack and profiles and WT11
is utilized as the physical radio over UART or USB interface.
Preliminary information – details subject to change