WS3410 Datasheet, PDF (1/8 Pages) Shenzhen Winsemi Microelectronics Co., Ltd – WS3410 Active PFC Non-isolated Buck LED Driver

WS3410 ProductDescription
Features
 Active PFC for High Power Factor and Low THD
 Critical Conduction Mode Operation
 System Efficiency up to 95%
 Without auxiliary winding
 Excellent Line and Load Regulation
 ±3% LED Output Current Accuracy
 Thermal Regulation Function
 LED Short/Open Protection
 Current Sensing Resistor Open Protection
 Auto Fault Recovery
 Available in SOT23-6 Package
Applications
 E27 LED Bulb, Spot Light
 PAR30, PAR38 Lamp
 T8/T10 LED String
 Other LED Lighting
Non-isolated Buck APFC Offline LED Driver
Description
The WS3410 is a high precision non-isolated buck driver
with active PFC, specially designed for universal input offline
constant current LED lighting. The driver with on-chip PFC
circuit achieves high power factor and low THD. Operating in
critical conduction mode, the power MOSFET switching loss
is reduced and the inductor is fully utilized.
With few external components, the LED output current
can be precisely controlled.
The WS3410 offers rich protection functions to improve
the system reliability, including LED open circuit protection,
LED short circuit protection, CS resistor open circuit
protection and cycle by cycle current limit. All the protection
functions are auto-recovery. The system reliability is further
improved by the thermal regulation function. The output
current is reduced when the driver is over temperature.
The WS3410 has ultra low start up current and ultra low
operating current.
The WS3410 is available in SOT23-6 Package
Typical Application
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
Copyright@WinsemiMicroelectronics Co.,Ltd.,All rightreserved
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
1030