WS-201 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Maintain with a minimum of spare parts and tools

WS-201 ^{Wind Sensor System}
Specialized Wind Sensors
The WS-201 Wind Sensor System is designed to meet the need for a highly reliable,
robust system.
The electronic components in the wind speed sensor are conservatively rated and are
completely solid state. The wind direction sensor uses a high-reliability potentiometer
to sense the vane position.
FEATURES
• Extremely rugged
• Low power drain
• Corrosion resistant stainless steel and anodized
aluminum
• Design wind tunnel tested at over 200 mph (89.4 m/s)
• Installation on standard one-inch pipe thread
• Speed sensor output is variable frequency range,
impedance and power
• Maintain with a minimum of spare parts and tools
WS-201 Wind Sensor
Met One
Instruments, Inc.
1600 Washington Blvd.,
Grants Pass, OR 97526
Tel [phone]
Fax [phone]
[e-mail]
SPECIFICATIONS
Wind Speed Sensor
Performance CHARACTERISTICS
Range:
Starting Threshold:
Accuracy:
Distant Constant:
0 - 200 mph (0 - 90 m/s)
Less than 2 mph (0.9 m/s)
±1 mph (0.5 m/s) or 2%
15 ft (4.6 m) maximum
ELECTRICAL CHARACTERISTICS
Power Required:
Signal Output:

6 mA max. at 10.5 to15.0 VDC
6V p-p minimum, square wave into 600 ohms;
F(hz) ≈ 22 x wind speed (m/s) ≈ 10 x wind speed (mph)
PHYSICAL CHARACTERISTICS
Cup Turning Radius:
Weight:
4.38 in (11.2 cm)
0.75 lb (0.34 kg)