VLED-25W Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Dimmable LED Drivers

VLED-25W Series
Dimmable LED Drivers
Constant Current & Constant Voltage
Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
60 Amps max @ 230 Vac, cold start 25ºC
Input AC Current:
0.4 A max @ 100Vac, 0.2 A max @ 220Vac
Maximum Power:
26W
THD:
<_ 20% @ full load
Line Regulation:
± 1% Constant Current, ± 2% Constant Voltage
Load Regulation:
± 3%
Leakage Current:
0.75 mA max @ 277Vac 60Hz
Turn-on Delay:
0.6S @ 110Vac, 0.3S @ 220Vac Typical
Ripple and Noise:
Protection:
3-4% V_o
Over-Voltage, Over-Current, Over-Load and
Short Circuit Protection with self-recovery
Environmental Specifications
Minimum Starting Temp: -40ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 100%
Cooling:
Convection
Sound Rating:
Class A
MTBF:
200,000 Hr (cc) or 130,000 Hr (cv) @ 110Vac,
80% load and 25ºC (MIL-HDBK-217F)
Lifetime:
91,000 Hours @ 120Vac, 80% load and 60ºC ambient
EMC:
FCC 47CFR Part 15 Class B compliant
Weight:
200 g
Ordering Options:
-D: 0-10V dimmable version comes with an extra three wires +Purple/-Gray/Yellow on
the output side. 0-10V Dimming is compatible with most quality 0-10V wall dimmers
and direct 0-10V analog signal. See page 2 for additional specifications.
Sign Components Manual
E332160
• Total Power: 25 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Power Factor with Active Correction
• Output Protection & Lightning Protection
• UL8750 and EN61347
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±5%)
Range (Vdc) Power (W) Efficiency
VLED25W-075-C0350-XX
350
38-75
26
86%
VLED25W-056-C0450-XX
450
28-56
26
85%
VLED25W-037-C0700-XX
700
19-37
26
85%
VLED25W-025-C1050-XX
1050
13-25
26
84%
VLED25W-019-C1400-XX
1400
10-19
26
82%
VLED25W-015-C1750-XX
1750
8-15
26
81%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
Output Voltage Output Current Max. Output
(Vdc ±5%)
Range (mA) Power (W)
VLED25W-024
24
0-1080
26
VLED25W-036
36
0-720
26
VLED25W-048
48
0-540
26
Typical
Efficiency
84%
85%
86%
Class 2: US/Canada US Only
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-25-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com