UT1250UL Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – PowerVerter® 1250W Utility/Work Truck Inverter/Charger with 2 Outlets

PowerVerter® 1250W Utility/Work Truck
Inverter/Charger with 2 Outlets
MODEL NUMBER: UT1250UL
Description
Tripp Lite UT1250UL Utility Work Truck Inverter / Charger are the quiet alternative to gas generators with no
fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through
premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated
charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable
for rugged work site applications. Supplies up to 1250 watts of continuous 120V AC power from any 12V DC
battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the
continuous output for 1-60 minutes, and DoubleBoost inverter output feature delivers up to 200% of continuous
output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized
equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected
equipment and the battery set is recharged via 3-stage selectable 10/40Amp charging system. In UPS mode, the
UT system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to
battery derived AC output. A set of high current DC input terminals is included for simple installation (user
supplies batteries and cabling – see owners manual for recommendations). Passes sine wave utility or generator
power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter
and UPS backup modes. Reliable large transformer design, with frequency control, powers resistive electronic
loads or large inductive motors, compressors and other devices with high current needs on startup. Included is
the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off
switching and continuous status information. The UT1250UL supports an unlimited amount of runtime with
user-supplied batteries.
Highlights
12V DC or 120VAC input;
120VAC output; 2 GFCI
protected outlets
1250 watts continuous, 1875
watts OverPower and 2500 watts
DoubleBoost inverter output
3 stage, 40A / 10A selectable wet
/ gel / AGM cell battery charger
Built-in Isobar® premium AC
surge protection and Auto
Transfer
Switching option for battery
backup / UPS operation
Meets OSHA requirements
Applications
Versatile inverter / charger system with
auto-transfer switching serves as an
automotive inverter for utility work
trucks, conversion vans and fleet
service vehicles; a standalone power
source for off grid, alternative energy
or export applications, emergency
home power applications such as
sump pumps, and as an
uninterruptible power supply (UPS) for
items compatible with a 16.6
millisecond transfer time
Package Includes
UT1250UL Inverter/Charger
APSRM4 Remote
Remote battery temperature
sensor cable
Instruction manual with warranty
information
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18" from the
UT1250UL's battery in the positive line.
Features
16.6 millisecond automatic transfer between line and battery power supports UPS protection for equipment compatible with a one cycle transfer time
1250W continuous AC output in inverter mode, 2500W continuous AC output in AC mode
1/5