UPMBB-05M Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – COLOR VARIATIONS MAY OCCUR

8
7
6
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF L-COM, INC. ANY REPRODUCTION IN PART OR WHOLE
WITHOUT THE WRITTEN PERMISSION OF L-COM, INC. IS PROHIBITED.
5
4
RoHS Compliant 
3
2
REVISIONS
REV
DESCRIPTION
E ECN 6479: REVISE DESCRIPTION TO J1 FROM TYPE A TO B
1
DATE
10/19/12
APPROVED
D.FRISIELLO
D
.463 11.75
MIN
LENGTH
.55 14
D
1.18 30
.71 18
PIN 1
"P1"
USB SERIES "B" PLUG
CONTACTS: 30 µINCHES
GOLD PLATING
C
.60 15
MOLDED HOOD
AND STRAIN RELIEF,
PVC, LIGHT GRAY (PANTONE 400C)
MOLDED HOOD
AND STRAIN RELIEF,
PVC, LIGHT GRAY (PANTONE 400C)
ONE 28AWG STRANDED TINNED COPPER TWISTED PAIR
TWO 20AWG STRANDED TINNED COPPER CONDUCTORS
OVERALL ALUMINIZED POLYESTER SHIELD WITH DRAIN
WIRE PLUS TINNED COPPER BRAIDED SHIELD.
PVC OUTER JACKET, LIGHT GRAY (PANTONE 400C)
PIN 1
2X, 4-40 UNC-2B
THREADED INSERT
(EMBEDDED)
C
PEM "STKB-440-4"
OR EQUIVALENT
"J1"
USB SERIES "B" RECEPTACLE E
PANEL MOUNT
CONTACTS: 30 µINCHES
GOLD PLATING
2X, .125 3.2
MODEL
LENGTH
B
"P1" _{WIRING DIAGRAM}
"J1"
NUMBER
METERS [FEET] _B
UPMBB-03M
0.3 [.98]
RED 1
1 VCC (CABLE POWER)
UPMBB-05M
0.5 [1.64]
.63 16
1.180 30
WHITE 2
GREEN 3
2 - DATA
3 + DATA
UPMBB-075M
UPMBB-1M
UPMBB-2M
0.75 [2.46]
1.0 [3.28]
2.0 [6.56]
BLACK 4
4 GND (CABLE GROUND)
UPMBB-3M
3.0 [9.84]
RECOMMENDED
DRAIN WIRE
UPMBB-4M
UPMBB-5M
4.0 [13.12]
5.0 [16.41]
PANEL CUTOUT
UNLESS OTHERWISE SPECIFIED,
APPROVALS
DATE
45 BEECHWOOD DRIVE
DIMENSIONS ARE IN INCHES [mm]
DRAWN BY
NORTH ANDOVER, MA
A
NOTES:
OVERALL CABLE LENGTH TOLERANCE:
≤12 [305] = +1 [25] / -0
>12 [305] ≤60 [1524] = +2 [51] / -0
D. PARHAM
CHECKED BY
D. CASTRO
01/04/2010
01/12/2010 ^CATEGORY
01845
A
1. CABLE ASSEMBLY SHALL HAVE 360° SHIELD TERMINATION.
2. CABLE ASSEMBLY SHALL MEET USB 2.0 REQUIREMENTS.
>60 [1524] ≤120 [3048] = +4 [102] / -0
>120 [3048] ≤300 [7620] = +6 [152] / -0
>300 [7620] = +5% / -0%
APPROVED BY
S. SMITH
01/13/2010
PRODUCT DESCRIPTION
USB
3. CABLE ASSEMBLY SHALL BE TESTED FOR CONTINUITY.
4. MOUNTING HARDWARE INCLUDED: 2X #4-40 X .38 LG. PHILLIPS HD SCREW
ALL OTHER DIMENSIONAL TOLERANCES:
.X = ± .2
.XX = ± .02
.XXX = ±.005
CONFIGURATION DETAILS OF
UNDIMENSIONED FEATURES
MAY VARY
CA USB-B PNL/USB-BM
5. CABLE ASSEMBLY SHALL BE INDIVIDUALLY PACKAGED IN
ACCORDANCE WITH L-COM SPECIFICATION PS-0031.
PROJECTION
COLOR VARIATIONS
MAY OCCUR
A 43321 ^SIZE
FSCM NO. DWG. NO.
UPMBB
REV.
E
SCALE: NONE CAD FILE: UPMBB.SLDDRW
SHEET 1 OF 1
8
7
6
5
4
3
2
1