UD1100IA2-01 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – UDS1100-IAP Industrial Device Server

UDS1100-IAP Industrial Device Server
In minutes, securely connect factory floor devices to
enterprise systems
Access, monitor and control equipment over Ethernet
Replace dedicated PCs and/or modem lines with fast and
reliable Ethernet networking
Supports RS-232, RS-422 and RS-485 communications
Includes Modbus TCP, ASCII, RTU and DF1 protocols
15KV serial ESD protection
Wide -40°– 70°C operating temperature range
Environmentally-friendly RoHS and WEEE-compliant
Remotely Monitor, Manage and Control Industrial
Equipment Over the Net
The UDS1100-IAP is a rugged and powerful tool
which enables users to connect, manage and control
just about any piece of industrial equipment from
virtually anywhere over Ethernet or the Internet.
This single-port Device Server is a quick, simple and
inexpensive way to bring the advantages of real-time
or on-demand information access.
Standards Based Communications
Using an open Ethernet architecture as a standard provides
the flexibility for equipment to communicate to virtually any
type of industrial device.
When used in conjunction with an OPC server, most
Windows^® based HMI, SCADA and PC-based control
applications have full access to information in the industrial
equipment networked by the UDS1100-IAP.
Extending Communications Across the Globe
Our approach to network-enabling devices is transparent to
your attached equipment and software so you won’t need
to change the way you work. Using a method called serial
tunneling, the UDS1100-IAP encapsulates serial data into
packets and transports it over Ethernet. Serial tunneling can
be done in multiple ways:
• Using Lantronix supplied Com Port Redirector^™
software, Windows device applications not
designed for network communications are
re-directed to communicate to devices connected
to the UDS1100-IAP.
• Connecting two UDS1100-IAP Device Servers
configured to automatically talk to each other over
the network creates virtual serial connections that
can extend serial communications across a facility
or around the world.
Built-in Web Server
The built-in web server enables users to access and
configure the UDS1100-IAP from a standard web browser.
Web pages enabling the UDS1100-IAP to be customized
for unique applications can be built using Lantronix
development tools. On-board Flash memory provides room
for future system software upgrades and maintenance-free,
nonvolatile web page storage.
Easy to Set Up and Use
The UDS1100-IAP can be set up locally through its serial
port, or remotely using Telnet or a web browser. The
included DeviceInstaller^™ Windows-based configuration
software simplifies setup and provides an easy way to:
• Assign IP & other network specific addresses
• Load custom web pages
• Enable web-based configuration of the Device Server
• Ping or query the attached device(s) over the network
• View specific device data files
• Upgrade firmware
• Simplify process of installing industrial protocols
Complete with an auto MDI/MDIX Ethernet interface, the
UDS1100-IAP is a powerful device communication solution
that’s perfect for your most demanding industrial applications.
Modem Replacement
In modem emulation mode, the UDS is used to replace dial-
up modems. The unit accepts modem AT commands on the
serial port. It then establishes a network connection to the
end device, leveraging network connections and bandwidth
to eliminate dedicated modems and phone lines.
RoHS-compliant, the UDS1100-IAP meets Directive 2002/95/EC
on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
If you’re looking for a transparent, cost-effective,
and scalable means to network-enable your industrial
automation equipment, look no further than the
UDS1100-IAP.