English
Language : 

U60 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – IzoTTM U60 FT Network Interface Module
IzoTTM U60 FT Network
®
Interface Module
USB interface to LonTalk®/IP-FT and LON®-FT
free topology twisted pair networks
IzoT U60 Key Features
• Provides a USB 2.0 to LonTalk/IP-FT or LON-FT interface for any controller or
device
• Compatible with hosts implementing the IzoT Device Stack EX or applications
requiring an ISO/IEC 14908-1 Layer 5 or Layer 2 interface
• Source code is available as a free download for a Linux-compatible driver
• Compact 72mm x 29mm (2.8” x 1.1”) board-level form-factor with 2.54mm (0.1”)
center pin headers for simple integration
• Pin-header USB interface to the host
• Pin-header network connector
• Transmit and receive signals provided for driving host indicators
• Service signal provided for driving a host Service indicator
• Powered by a 3.3VDC input
USB Network Interface
Add a LonTalk/IP-FT or LON-FT interface to your controller. The IzoT U60 FT Network
Interface Module is a compact 72mm x 29mm (2.8” x 1.1”) board-level module with USB
interface that can be easily integrated into any controller or device.
The U60 FT module is compatible with the LonTalk Device Stack EX which provide source
code for LonTalk/IP and native LON compatible protocol stacks. It is also compatible with
host applications requiring an ISO/IEC 14908-1 Layer 5 or Layer 2 interface.
Tx and Rx signals are provided on the U60 connector so that the host controller can provide
transmit and receive indicators.
A Service signal is provided on the U60 connector so that the host controller can provide a
network Service indicator.
Three 2.54mm (0.1”) center pin-header connectors are provided by the FT network, USB,
power input, transmit/receive signals, and service signal. Pin assignments are listed in the
following tables.
www.echelon.com