TSC-075 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Dimmable LED Drivers

TSC-75W Series
Dimmable LED Drivers
Constant Current
Aluminum Housing
Electrical Specifications
Input Voltage Range:
277 - 480 Nom. Vac (249 - 528 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 277V through 480V
Inrush Current:
135.0 Amps max @ 480 Vac, cold start 25ºC
Input AC Current:
0.34 A max 277VAC, 0.21 A max 480Vac
Maximum Power:
75W
Line Regulation:
± 1%
Load Regulation:
± 3%
THD:
<_ 20% @ full load
Leakage Current:
0.7 mA 480 Vac 50Hz
Typical Efficiency
85-87% at 480Vac
Turn-on Delay:
1 S typical
Output Current Ripple:
Output Protection:
20%
Over-Voltage, Over-Temperature,
and Short Circuit Protection
Environmental Specifications
Minimum Starting Temp: -40ºC
Maximum Case Temp. 90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 100%
Cooling:
Convection
Sound Rating:
Class A
MTBF:
380,000 Hours (700 mA model) at 480Vac input, 80%
load and 25ºC ambient conditions per MIL-HDBK-217F
Lifetime:
Weight:
50,000 Hours @ Case Temperature = 60ºC
2.2 lbs. (1.0 kg)
• Total Power: 75 Watts
• Input Voltage: 277-480 Vac Nom.
• UL Dry, Damp & Wet Location Rated
• IP67
• High Power Factor
• UL Type HL Rated
* UL8750
E332160
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output
(mA ±5%)
Range (Vdc)
Power (W)
TSC-075S035ST
350
107-214
75
TSC-075S070ST
700
53-107
75
TSC-075S105ST
1050
36-72
75
TSC-075S140ST
1400
26-53
75
TSC-075S210ST
2100
18-36
75
TSC-075S315ST
3150
12-24
75
Typical
Efficiency
87%
86%
87%
87%
86%
85%
Dimming Versions - Product Specifications
Model Number
Output Current Output Voltage Max. Output
(mA ±5%)
Range (Vdc)
Power (W)
TSC-075S035DT
350
107-214
75
TSC-075S070DT
700
53-107
75
TSC-075S105DT
1050
36-72
75
TSC-075S140DT
1400
26-53
75
TSC-075S210DT
2100
18-36
75
TSC-075S315DT
3150
12-24
75
The output current is adjustable at factory from 50% to 100%.
Class 2: US/Canada
Typical
Efficiency
87%
86%
87%
87%
86%
85%
US Only
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-31-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com