TS61001 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – Full-bridge FET Driver

TS61001
Version 1.0
Full-bridge FET Driver
DESCRIPTION
The TS61001 is a high-voltage FET driver that can
be used to drive N-channel devices in full or half
bridge configurations. The TS61001 can support
various power converter applications, multiple
standard and proprietary wireless power
applications, and motor driver systems.
APPLICATIONS
 Multi-standard compliant and non-compliant
wireless chargers for:
o Cell Phones and Smartphones
o GPS Devices
o Digital Cameras
o Tablets and eReaders
o Portable Lighting
 Full and half-bridge power converters
 Motor drive applications
FEATURES
 Supports Qi®, PMA, A4WP and proprietary
wireless power applications
 Power outputs scalable based on FET size
 Support for half and full-bridge power sections
 Integrated comparator
 Low external component count
 Available in 28 pin 5x5 QFN
SPECIFICATIONS
 Drives both low side and high side N-channel
MOSFETS
 6Ω pull-up, 2Ω pull-down gate drivers
 Independent TTL compatible inputs
 Floating gate drive and bootstrap circuits for
driving high side devices – up to 85V for the
bootstrap supply voltage
 5 - 12V gate drive capability allows compatibility
with a wide range of FETs
 Fast propagation delays (<50nS typical)
 Matched channel to channel delays (<25nS
mismatch)
 Fast rise and fall times
 Optional break before make detection to set
minimum dead time protection
 Available comparator, amplifier and 3.3V linear
regulator (10mA capability) for supporting
circuitry
 Under voltage lock out protection
 Over temperature shut down (TSD) protection
TYPICAL APPLICATION
DC
Supply
TS80000
+
TS61001
TS51111
Load
Transmitter
Receiver
Specifications subject to change
WWW.TRIUNESYSTEMS.COM
Triune Systems Proprietary and Confidential Information
DO NOT DUPLICATE
-1-
Copyright © 2013, Triune Systems, LLC