|
TS30021 Datasheet, PDF (1/19 Pages) List of Unclassifed Manufacturers – High Efficiency 1A/2A/3A Current-Mode Synchronous Buck DC/DC Converter, 2MHz and 470mA LDO | |||
|
TS30021/22/23
Version 1.5
High Efficiency 1A/2A/3A Current-Mode Synchronous Buck
DC/DC Converter, 2MHz and 470mA LDO
DESCRIPTION
The TS30021 (1A), TS30022 (2A) and TS30023
(3A) are DC/DC synchronous switching regulator
with fully integrated power switches, internal
compensation, and full fault protection, with a low-
dropout regulator. The switching frequency of
2MHz enables the use of small filter components
resulting in minimal board space and reduced BOM
costs. In addition, a 470mA LDO with external
voltage adjustment is provided. The LDO is capable
of working at the VCC supply.
The TS30021/22/23 utilizes current mode feedback
in normal regulation PWM mode. When the
regulator is disabled (EN is low), the device draws
less than 10uA quiescent current.
The TS30021/22/23 integrates a wide range of
protection circuitry including input supply under-
voltage lockout, output voltage soft start, current
limit, and thermal shutdown.
The TS30021/22/23 includes supervisory reporting
through the PG (Power Good) open drain output to
interface other components in the system.
APPLICATIONS
ï§ On-card switching regulators
ï§ Set-top box, DVD, LCD, LED supply
ï§ Industrial power supplies
FEATURES
ï§ Fixed output voltage choices: 1.5V, 1.8V, 2.5V,
3.3V, and 5V with +/- 2% output tolerance
ï§ Adjustable version output voltage range: 0.8V to
5V with +/- 1.5% reference
ï§ Wide input voltage range
TS30021/22/23: 4.5V to 16V (18V Abs Max)
ï§ 2MHz +/- 10% fixed switching frequency
ï§ Continuous output current: 1A (TS30021), 2A
(TS30022) and 3A (TS30023)
ï§ High efficiency â up to 95%
ï§ Current mode PWM control with PFM mode for
improved light load efficiency
ï§ Voltage supervisor for VOUT reported at the PG pin
ï§ Input supply under voltage lockout
ï§ Soft start for controlled startup with no overshoot
ï§ Full protection for over-current, over-temperature,
and VOUT over-voltage
ï§ Less than 10uA in shutdown mode
ï§ Low external component count
ï§ LDO has adjustable output voltage 0.8V to 5V and
470mA output current capability
SUMMARY SPECIFICATION
ï§ Junction operating temperature -40 °C to 125 °C
ï§ Packaged in a 16pin QFN (3x3)
TYPICAL APPLICATIONS
Adjustable Switcher Output
Fixed Switcher Output
VCC
Cbypass
VCC
VLDO
Cbypass-LDO
VLDO
EN
EN
BST
VSW
FBSW
VOLDO
FBLDO
PG
CBST
Lout
RTOPSW
RBOTSW
VOUT
Cout
RTOP
RBOT
Cout_LDO
VOUT
10kW
(Optional)
VOUT_LDO
PG
VCC
Cbypass
VLDO
Cbypass-LDO
VCC
VLDO
EN
EN
BST
VSW
FBSW
VOLDO
FBLDO
PG
CBST
Lout
Cout
VOUT
RTOP
RBOT
Cout_LDO
VOUT
10kW
(Optional)
VOUT_LDO
PG
Specifications subject to change
WWW.TRIUNESYSTEMS.COM
TRIUNE SYSTEMS PROPRIETARY & CONFIDENTIAL INFORMATION
-1-
Copyright © 2013, Triune Systems, LLC
|
▷ |