TRC-150D Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers

TRC-150W Dimmable Series
Switch Mode LED Drivers
Constant Current
Aluminum Housing
Electrical Specifications
Input Voltage Range:
100 - 277 Nom. Vac (90 - 305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
65 Amps maximum @ 230 Vac, cold start 25ºC
Input Current:
1.8 A max 100Vac, 0.9 A max 220Vac
Maximum Power:
150W
Line Regulation:
± 1%
Load Regulation:
± 3%
Leakage Current:
0.75 mA 277 Vac 60Hz
Typical Efficiency
92.5%-93.5% at 220Vac
Turn-on Delay:
0.5S typical 110Vac, 0.3S typical 220Vac
Ripple and Noise:
Protection:
13V at 350 mA
Over-Voltage, Over-Temperature (110°C), Lightning,
and Short Circuit Protection with Self Recovery
Environmental Specifications
Minimum Starting Temp: -35ºC
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 100%
Cooling:
Convection
Sound Rating:
Class A
MTBF:
250,000 Hours (350 mA model) @ 110Vac input, 80%
load and 25ºC ambient conditions per MIL-HDBK-217F
230,000 Hours (1400 mA model) @ 110Vac input, 80%
load and 25ºC ambient conditions per MIL-HDBK-217F
Lifetime:
350mA: 58,000 Hours @ 220Vac, 80% load, Tc=60ºC
1400mA: 88,000 Hours @ 220Vac, 80% load, Tc=60ºC
Weight:
3.31 lbs. (1.5 kg)
New Surge Protection and HI-POT Testing
Metal Lock Sheet
Nut
HI-POT Test
Normal Application
The new design of this LED driver provides 1.4KV surge protection. To properly
HI-POT test this unit, the surge protection must be disconnected. The screw, nut, and
metal lock sheet on the input side of the driver provide for this. To test, first remove
the nut and lock sheet as shown. After testing, secure the nut and lock sheet to
provide line-to-earth protection.
This HI-POT test feature is available on product manufactured after August 15, 2015.
• Total Power: 150 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP67
• Ultra-high Efficiency
• High Power Factor with Active Correction
• UL8750
Dimming - Product Specifications
Model Number
TRC-150S035DT
TRC-150S045DT
TRC-150S070DT
TRC-150S105DT
TRC-150S140DT
Output Current
(mA)*
350
450
700
1050
1400
Output Voltage
Range (Vdc)
214~428
166~333
107~214
107~142
53~107
Max. Output
Power (W)
150
150
150
150
150
Typical
Efficiency
93.5%
93.0%
93.0%
93.0%
92.5%
* The output current is adjustable at factory from 50% to 100%.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 9-1-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com