TRC-150 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Switch Mode LED Drivers

150W TRC-150 Series
Switch Mode LED Drivers
Constant Current
Aluminum Housing
Electrical Specifications
Input Voltage Range:
100 - 277 Nom. Vac (90 - 305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
65 Amps max @ 230 Vac, cold start 25ºC
Input Current:
1.8 A max 100Vac, 0.9 A max 220Vac
Maximum Power:
150W
Line Regulation:
± 1%
Load Regulation:
± 3%
Leakage Current:
1 mA 277 VAC 60Hz
Typical Efficiency
89-91% at 277VAC
Turn-on Delay:
0.5S typical 110Vac, 0.3S typical 220Vac
Ripple and Noise:
Protection:
3% V_o
Over-Voltage, Over-Temperature (110°C), Lightning,
and Short Circuit Protection with Self Recovery
Environmental Specifications
Max Case Temperature: 350mA, 450mA, 700mA Tc= 88.2ºC, all others Tc= 90ºC
Storage Temperature:
-40ºC to +85ºC
Minimum Starting Temp: -35ºC
Humidity:
5% to 100%
Cooling:
Convection
Sound Rating:
MTBF:
Class A
- 250,000 Hrs (350mA model) @110Vac input, 80% load,
25ºC ambient conditions per MIL-HDBK-217F
- 195,000 Hrs (5950mA model) @110Vac input, 80% load,
25ºC ambient conditions per MIL-HDBK-217F
Lifetime:
- 90,000 Hrs (350mA model) @ 220Vac, 80% load,
60ºC case temp.
- 50,000 Hrs (5950mA model) @ 220Vac, 80% load,
60ºC case temp.
Weight:
3.31 lbs. (1.5 kg)
• Total Power: 150 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP67
• Ultra-high Efficiency
• High Power Factor with Active Correction
• UL8750
New Surge Protection and HI-POT Testing
Metal Lock Sheet
Nut
HI-POT Test
Normal Application
The new design of this LED driver provides 1.4KV surge protection. To properly
HI-POT test this unit, the surge protection must be disconnected. The screw, nut, and
metal lock sheet on the input side of the driver provide for this. To test, first remove
the nut and lock sheet as shown. After testing, secure the nut and lock sheet to
provide line-to-earth protection.
This HI-POT test feature is available on product manufactured after August 15, 2015.
Constant Current - Product Specifications
Model Name
Output Current Output Voltage Max Output Typical
(mA)*
Range (Vdc) Power (W) Efficiency
TRC-150S035ST
TRC-150S045ST
TRC-150S070ST
TRC-150S105ST
TRC-150S140ST
TRC-150S175ST
TRC-150S210ST
TRC-150S245ST
TRC-150S280ST
TRC-150S315ST
TRC-150S350ST
TRC-150S420ST
TRC-150S490ST
TRC-150S595ST
350
450
700
1050
1400
1750
2100
2450
2800
3150
3500
4200
4900
5950
256-428
200-333
128-214
85-142
64-107
51-85
42-71
36-61
31-53
28-47
25-42
21-35
18-30
15-25
150
92%
150
92%
150
92%
150
92%
150
92%
150
91%
150
91%
150
90%
150
90%
150
90%
150
90%
150
89%
150
89%
150
88%
* The output current is adjustable at factory from 50% to 100%.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 9-1-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com