TRC-025 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 25W Switch Mode LED Drivers Constant Current, Long Life

TRC-025 Series–Fixed Output and Dimmable
25W Switch Mode LED Drivers
Constant Current, Long Life
Electrical Specifications
Input Voltage Range:
120 - 277 Nom. Vac (90 - 305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Input Current:
0.32 A @ 100Vac, 0.15 A @ 220Vac
Inrush Current:
60.0 Amps @ 230Vac, 25°C Cold Start
Efficiency
85-85% typical @ maximum load
Maximum Power:
25W
Line Regulation:
± 3%
Load Regulation:
± 5%
Turn-on Time Delay:
3S
Output Protection:
Over-Voltage, Over-Current,
Short Circuit Protection with Auto Recovery
Environmental Specifications
Minimum Starting Temp: -20ºC
Maximum Case Temp. 89°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
10% to 100%
Cooling:
Convection
Sound Rating:
Class A
MTBF:
484,000 Hours @ 25ºC, 80% load, 110Vac input
on 2080 mA output model (MIL-HDBK-217F)
Lifetime:
79,000 Hours @ 45ºC, 80% load, 110Vac input
on 2080 mA output model
Weight:
0.4 lbs.
• Total Power: 25 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66
• High Efficiency
• High Power Factor
Constant Current Versions - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA)
Range (Vdc) Power (W) Efficiency
TRC-025S035PS
350
24-72
25
84%
TRC-025S045PS
450
19-56
25
84%
TRC-025S062PS
620
13-40
25
83%
TRC-025S070PS
700
12-36
25
83%
TRC-025S105PS
1050
8-24
25
82%
TRC-025S140PS
1400
6-18
25
81%
TRC-025S175PS
1750
5-14
25
81%
TRC-025S208PS
2080
4-12
25
80%
Dimmable Versions - Product Specifications
Model Number
Output Current Output Voltage Max. Output
(mA)
Range (Vdc) Power (W)
TRC-025S035DS
350
24-72
25
TRC-025S045DS
450
19-56
25
TRC-025S062DS
620
13-40
25
TRC-025S070DS
700
12-36
25
TRC-025S105DS
1050
8-24
25
TRC-025S140DS
1400
6-18
25
TRC-025S175DS
1750
5-14
25
TRC-025S208DS
2080
4-12
25
Typical
Efficiency
84%
84%
83%
83%
82%
81%
81%
80%
Class 2: US/Canada US Only
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-31-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com