TR-900-SC-PA Datasheet, PDF (1/16 Pages) List of Unclassifed Manufacturers – SC-PA SERIES TRANSCEIVER MODULE DESIGN GUIDE

HIGH-PERFORMANCE
SC-PA
PRE-CERTIFIED
RF TRANSCEIVER
SC-PA SERIES TRANSCEIVER MODULE DESIGN GUIDE
DESCRIPTION:
The PA version of Linx popular SC Series greatly reduces the time and
expense of making a product wireless. This is because the transceiver
module is pre-approved by the FCC when used with the appropriate
proprietary antennas.The TR-XXX-SC-PA transceiver module is
designed for the cost-effective, bi-directional transfer of wireless
information. The Transceiver utilizes an advanced synthesized
superhet architecture and has direct interface for analog or digital
information, UART-compatible data output, RSSI, low power
consumption, wide operational voltage, on-board TX/RX switch, SAW
front-end filter, and many other useful features. Fast turnaround times,
along with the support for data rates to 33.6Kbps, make the
transceiver suitable for a wide range of applications. Housed in a
compact through-hole package, the transceiver requires no tuning or
external RF components (except antenna), allowing for straightforward
application, even by engineers lacking previous RF experience.
F E AT U R E S
1.10"
Nomenclature Area
1.50"
0.175"
0.90"
0.375"
∅ .325"
0.425"
1.300"
To Pin Centers
0.05"
0.13"
0.022"
0.10"
Physical Dimensions
• FCC precertified for immediate integration
• Direct interface for analog or digital information
• Precision crystal-controlled synthesized architecture
• Transparent serial input
• UART-compatible data output
• Built-in data squelching
• High data-rate: up to 33,600bps
• Wide-range analog capability including audio
• Single-antenna-ready (No TX/RX switch required)
• Differential LO dramatically reduces unintended radiation
• Output power can be programmed with an external resistor
• Good sensitivity (-94dBm typical at 10^-5 BER)
• SAW filter on front end for superior out-of-band rejection
• Received signal strength indication
• Fast start-up and turnaround time
• Wide input voltage range (2.7 to 13 VDC)
• Very low power consumption (as low as 12 mA)
• Power-down mode – 50µA max (V_CC @ 5V)
A P P L I C AT I O N S
• Small Area Networks
• Wireless RS:232/485 Modems
• 2-Way Paging
• Remote Control W/ Confirmation
• Telemetry
• Data Collection
• Home/Industrial Automation
• Long-Range RFID
• Robotics
• Wire Elimination
Revised 10/31/01
ORDERING INFORMATION
PART #
DESCRIPTION
TR-XXX-SC-PA SC-PA Transceiver
XXX=916MHz
Page 1