|
TP32W003050 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Tiny washable momentary pushbutton switches | |||
|
TP series
Tiny washable momentary pushbutton switches
Distinctive features and specifications
â Process sealed
⢠Single piece case
⢠O-ring seal between actuator and bushing
⢠Epoxy sealed terminals
â Wide variety of contact materials
â Same PCB layout as TL, TR and TG tiny switches
B2
ELECTRICAL SPECIFICATIONS
⢠Max. current/voltage rating with resistive load :
- gold plated contacts : 0,4VA 20V max. AC or DC
- silver plated contacts : 0,5A 48V max. AC or DC
⢠Minimum load : 10mA 50mV - 10µA 5VDC
⢠Contact resistance : 50 mΩ max.
⢠Insulation resistance : 1.000 MΩ min. at 500VDC
⢠Dielectric strength :
1.000 Vrms 50 Hz min. between terminals and frame
500 Vrms 50 Hz min. between terminals
⢠Electrical life at full load :
- gold plated contacts : 60.000 cycles
- silver plated contacts : 20.000 cycles
GENERAL SPECIFICATIONS
⢠Total travel :
- function 2 : 1 mm (.039)
- function 3 : 0,8 mm (.031)
⢠Strength of terminals : pull-out force - 10N max.
⢠Operating temperature : -30°C to +85°C
⢠Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3)
⢠Cleaning : solvents or water + detergent
⢠Wave soldering : 260°C - 5 sec.
MATERIALS
⢠Case : PBT
⢠Actuator : polyamide, glass
filled
⢠Contacts and terminals :
0 : brass, gold plated
1 : brass, silver plated
3 : brass, gold plated (1,27
micron gold)
8 : contact brass, gold plated
+ tin plated terminals
9 : contact brass, gold plated
(1,27 micron gold) + tin plated
terminals
⢠Terminal seal : epoxy
B2-6
www.apem.com
APEM
|
▷ |