TM2801 Datasheet, PDF (1/20 Pages) List of Unclassifed Manufacturers – 2.8in PCAP Touch Module

Features
• Complete Module for Standalone Use:
– Atmel XMEGA256A3BU MCU
– Projected Capacitive Multi Touch Controller
– 2.8in LCD
– USB Connectivity
– SD Card
• MCU:
– ATXMEGA256A3BU
– 256KBytes Flash / 8Kbytes Boot
– 16KBytes RAM
– 4KBytes EEPROM
– USB 2.0 Full speed (12Mbps) and low speed (1.5Mbps)
• Storage:
– SD/MMC
• Touch:
– Atmel maXTouch mXT143E Touch Controller
– Supports up to 8 touches
• Display:
– Displaytech SDT028ATFT 2.8in LCD
– 320x240 resolution
– 20 ms typical response time
– SPI Communication via ILI9320 Driver IC
– Optional support for 18-bit parallel interface
– White LED backlight
• Cover Panel:
– 1.2mm Soda Lime Glass
– Optional 0.7mm Gorilla Glass™
PDA TM2801:
2.8in PCAP
Touch Module
1211-3-3