TM24RSG-5A-88 Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Modular Jack Connector for High-Speed Transmission

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW ^{All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.}
Modular Jack Connector for High-Speed Transmission
TM24R Series
Unique Contact Configuration
C
B
A
A-A
(Contact No. 1, 4, and 8)
A
B
C
B-B
(Contact No. 2, 5, and 7)
C-C
(Contact No. 3 and 6)
sFeatures
1. Supports high-speed transmission
Meets requirements of 10G Ethernet standard
IEEE802.3an for FEXT, Return loss and Z bal.
2. Unique contact configuration (Patented)
and board-mounting pattern
The adjacent contacts have different angles of
engagement thus increasing the distance between them,
in effect reducing the cross talk within connector and its
footprint.
Contact #3 and # 6, affecting the cross talk the most;
have been isolated from other contacts resulting in
maximum NEXT noise suppression.
In addition, the board layout allows easy tracing of the
differential signal lines.
3. Full EMI shielding
The entire connector is covered with a metal shell.
Multiple panel ground contact springs (2 on each side of
the mating opening) and 4 board ground connection
solder contacts placed at each corner of the connector
guarantee effective suppression of noise radiation.
4. Sequential mating
Separate ground springs (Patent pending) make contact
with the mating connector’s ground before the signal
contacts, allowing equalization of any ground differential.
5. Conforms to FCC (Federal Communications
Commission) standards
Meets requirements of FCC Title 47, Part 68, Subpart F.
sApplications
LAN related equipment, measuring instruments, office
equipment and other high transmission speed applications
requiring use of high performance modular jacks.
Recommended board layout for differential routing
6
78
3
54
21
Differential pair 4
Differential pair 3
Differential pair 2
Differential pair 1
Panel ground
contact springs
Board ground connection
solder contacts
Separate ground springs
Metal shell
Separation
Ground spring
2006.10
1