TL-8A Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – HUBER+SUHNER® DATA SHEET RF ASSEMBLIES

HUBER+SUHNER^® DATA SHEET RF ASSEMBLIES
Test Lead: TL-8A
Rev.: A
Description
Test Lead assembly for indoor applications (Test and Measurement) consisting of a high flexible PE foamed cable with
armouring protection and 2x N male straight connectors for frequency up to 8 GHz.
ID (Material/Item No.)
Description (Product)
85006682
TL-8A-11N-11N-01500-51
Product Configuration
Cable type
Armour
Length of Assembly
Connector A
Connector B
Cable entry protection
50Ÿ +/-1Ÿ, PE Foam double screen
Steel wire spring, steel braid, TPU blue, max. dia. 10.4 mm
1500 mm +/- 15 mm
N Straight male, knurl / hex. 19 mm, Quick-Lock
Nut: steel; body: brass/SUCOPLATE®; Center Contact: Cu-Be/Gold
N Straight male, knurl / hex. 19 mm, Quick-Lock
Nut: steel; body: brass/SUCOPLATE®; Center Contact: Cu-Be/Gold
PA, black
Technical Data
Mechanical Data
Mating cycle *)
Tensile Force (max.)
Recom. mating torque **)
Environmental Data
Operating Temperature
Storage Temperature
RoHS, REACH
Water protection***)
Electrical Data
Impedance
Velocity of propagation
Capacitance
Dielectric withstand voltage
Return Loss
Attenuation (assembly)
Power handling
Screening effectiveness
Insertion Loss stability ****)
Phase stability ****)
> 3000
200 N
1.0 Nm
Bending Radius repeated (min.)
Connector interface
Weight
55 mm (preferred: 100 mm)
IEC 61169-16 / MIL-STD-348A/304
0.295 kg
- 5°C to + 85°C
- 40°C to + 85°C
compliant
N-Connector without gasket on Interface
50 : +/-1 :
82 %
82 pF / m
500 V rms
Frequency
equal or better
typically, at 25°C
sea level, at 40°C
Operating Frequency
Insulation resistance
Time delay
up to 8 GHz
> 5 x 10³ MŸ
4.3 ns / m
1 GHz
- 32 dB
0.54 dB
150 W
> 80 dB
< 0.02 dB
+/- 1.5° el.
2 GHz
- 29 dB
0.80 dB
105 W
> 76 dB
< 0.03 dB
+/- 2.5° el.
3 GHz
- 26 dB
1.00 dB
80 W
> 70 dB
< 0.04 dB
+/- 4° el.
4 GHz
- 26 dB
1.16 dB
75 W
> 65 dB
< 0.05 dB
+/- 5° el.
6 GHz
- 25 dB
1.50 dB
62 W
> 60 dB
< 0.08 dB
+/- 8° el.
8 GHz
- 22 dB
1.84 dB
50 W
> 50 dB
< 0.10 dB
+/- 10° el.
General Information
*) Number of Mating
**) H+S torque wrench
***) Waterproof
****) Stability test
With use of torque wrench at recommended value, clean interface after each 20 matings,
mated with connector according IEC or MIL standard
H+S description: 74_Z-0-0-321 // material/item number: 22651994
with gasket: IP 67
One, 180° revers bends, 75 mm radius mandrel
HUBER+SUHNER is certified according to ISO 9001 and ISO 14001
WAIVER!
It is exclusively in written agreements that we provide our customers with warrants and
representations as to the technical specifications and/or the fitness for any particular purpose. The
facts and figures contained herein are carefully compiled to the best of our knowledge, but they are
intended for general informational purposes only.
HUBER+SUHNER – Excellence in Connectivity Solutions
DS-TL-8A-11N-11N-01500-51
DOC-0000413919
HUBER+SUHNER AG
RF Technology
9100 Herisau, Switzerland
Phone [phone]
Fax [phone]
www.hubersuhner.com
Rev.: A