SVH-1920 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – HD LCD Controller Board

Panel Connectivity
1920 x 1200
1920 x 1080
1680 x 1050
1600 x 1200
1440 x 900
1366 x 768
1280 x 1024
1280 x 800
1280 x 768
1024 x 768
800 x 480
800 x 600
640 x 480
Input
Analog RGB
DVI-D
Video
60Hz at WUXGA, UXGA
75Hz at SXGA, WXGA, XGA, SVGA, VGA
With auto detect of Digital Separate Sync,
Sync-On-Green & Composite Sync.
Auto detects VGAWUXGA, interlaced &
non-interlaced
60Hz at WUXGA
60Hz at UXGA
75Hz at SXGA, WXGA, XGA, SVGA, VGA
NTSC / PAL / SECAM (Interlaced)
Composite Video S-video
HD / SD Component
Options
HD-SDI Daughter board, Infra-Red Remote handset,
2W per channel Audio Amplifier.
Reliability
Calculated Mean Time Between Failures
In excess of 100,000 hours. Warranty : 3 years
SVH-1920+
HD LCD Controller Board
Key Features :
> 10-Bit, 1920 x 1200
> Multiple Signal Inputs
> DVI, VGA, Video
> PAL, NTSC, SECAM Support
The SVH-1920+ is a fully buffered mult-sync interface controller for
providing analog and digital connection for a wide range of TFT LCD
panels up to WUXGA resolution. Featuring full screen image expansion
of lower resolutions, and PIP functions. The SVH-1920+ also supports
an optional High-Definition Serial Digital Interface (HD-SDI) adaptor for
professional and broadcast video applications.
Features
Colors:

Functions :
Function Controls:

Image Scaling :

Image Control :



Other Features :





Power Requirements :

Panel Power :
Panel Signal :
Inverter Support :
Plug & Play :
Status Indicator :
Up to 10 Bit per color,
ie 1.06 Billion colors
On Screen Display (OSD) menu
External buttons, Infra-Red controls,
Serial Port control
Up/Down scaling to fit input to panel
format
Auto configuration, Brightness,
Contrast, Clock, Phase, Color
temperature, Image position,
Saturation, Hue, Gamma.
System Information, OSD position,
Scaling to fill screen and fill to aspect
ratio, OSD timeout, Factory reset, OSD
menu transparency, Picture in Picture
Programmable hot keys, Serial port
potocol, Optional ambient light sensor.
+12VDC / +24VDC ±5%,10W
(controller only)
Supports 3.3V, 5V, 12V & 18V panels.
Single channel TTL & LVDS support.
DPMS Enable pin (3.3V or 5V)
DDC 1,2/b compatible
Dual Color LED support.
© Digital View Group Ltd 2011 | www.digitalview.com