SVAC3-S-E120 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Digital Servo Drive w/ Ethernet

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
SVAC3-S-E120
Digital Servo Drive w/ Ethernet
1pc. - 471.00
50pc. - 353.25
Product Features
Digital servo drive in a compact package
DSP-based current control
Operates from 120 VAC
Provides motor current up to 3.5 A rms continuous,
7.5 A rms peak
Fast 10/100 Ethernet for programming and
communications
Three pulse-based control modes: step & direction,
A/B quadrature, CW/CCW pulse
Velocity (oscillator) control mode with sophisticated
joystick operation
Streaming serial command mode (SCL) for
commands sent from a host controller
UDP & TCP support
4 digital inputs, 2 digital outputs, all optically
isolated
1 analog input, +/-10 volt range
Jerk filter for S-curve acceleration ramps
Description
The SVAC3-S-E120 is a compact and cost-effective servo drive that is compatible with a variety of servo motors
and a great choice for many OEM applications. Its all-digital design and DSP-based current control allow for
smooth motion and a quick response from the specially matched set of Applied Motion motors available with it.
Power to the drive comes from single-phase 120 VAC and the drive can output up to 3.5 A rms continuous, 7.5 A
rms peak to the servo motor. The drive also has built-in protection features like over-voltage, over-temperature,
and over-current, which prevent damage to the drive while running in adverse conditions.
The SVAC3-S-E120 can operate in analog torque/velocity, pulse & direction, and streaming serial (SCL) control
modes. Select the control mode, tune the servo motor and configure the drive using the Quick Tuner™ software.
For connecting to external devices such as limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and
other devices, the drive comes with 4 digital inputs, 2 digital outputs, and 1 analog input. The drive also features
an Ethernet port for configuration and communications. The Ethernet port is fast 10/100 Mbit, and the drive
supports both TCP and UDP communication protocols.
This servo motor drive is UL Recognized (File No. E332730), CE approved, and RoHS compliant.