SV7-SI-AF Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Si Programmable Servo Drive w/ Encoder outputs

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
SV7-Si-AF
Si Programmable Servo Drive w/ Encoder outputs
1pc. - 606.00
50pc. - 454.50
Product Features
Programmable digital servo drive in a compact
package
DSP-based current control, sinusoidal commutation
and jerk filter
Operates from 24-80 VDC
Provides motor current up to 7.0 A rms continuous,
14.0 A rms peak
Si Programmer™ for icon-based motion control
programming
100 lines of Si program capability
Easiest-to-use motion programming tools
Buffered encoder outputs for connection to external
motion controller or other devices
8 digital inputs, 4 digital outputs, all optically
isolated
2 analog inputs, +/-10 volt range
RS-232 port for programming and communications
Description
The SV series servo drives are suitable for a wide range of motion applications. They are built around a powerful
digital signal processor coupled to an efficient MOSFET PWM amplifier. The SV drives include 12 optically isolated
I/O points plus analog inputs. A sophisticated, yet easy to tune position loop has independent digital settings for
proportional, integral and derivative gains plus velocity feedback and velocity and acceleration feedforward.
All SV drives are capable of running brushless, brushed, and linear servo motors. A timing wizard automatically
configures the encoder and commutation timing for virtually any brushless or brushed DC motor. Tuning is easy
with our Quick Tuner™ software, featuring a built-in digital oscilloscope