SV7-S-RE Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Digital Servo Drive w/ RS-485

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
SV7-S-RE
Digital Servo Drive w/ RS-485
1pc. - 484.00
50pc. - 363.00
Product Features
Digital servo drive in a compact package
DSP-based current control, sinusoidal commutation
and jerk filter
Operates from 24-80 VDC
Provides motor current up to 7.0 A rms continuous,
14.0 A rms peak
Three pulse-based control modes: step & direction,
A/B quadrature, CW/CCW pulse
Velocity (oscillator) control mode with sophisticated
joystick operation
Streaming serial command mode (SCL) for
commands sent from a host controller
8 digital inputs, 4 digital outputs, all optically
isolated
2 analog inputs, +/-10 volt range
RS-232 port for programming and communications
RS-485 port for serial networking up to 32 axes
Description
The SV series servo drives are suitable for a wide range of motion applications. They are built around a powerful
digital signal processor coupled to an efficient MOSFET PWM amplifier. The SV drives include up to 12 optically
isolated I/O points plus analog inputs. A sophisticated, yet easy to tune position loop has independent digital
settings for proportional, integral and derivative gains plus velocity feedback and velocity and acceleration
feedforward.
All SV drives are capable of running brushless, brushed, and linear servo motors. A timing wizard automatically
configures the encoder and commutation timing for virtually any brushless or brushed DC motor. Tuning is easy
with our Quick Tuner™ software, featuring a built-in digital oscilloscope