SU10000RT3U2TF Datasheet, PDF (1/8 Pages) Tripp Lite. All Rights Reserved – SmartOnline 208-120V 10kVA 9kW On-Line Double-Conversion UPS, Extended Run, SNMP,Webcard, 10U Vertical Rack-Tower, USB, DB9 Serial Bypass Switch

SmartOnline 10kVA On-Line Double-Conversion
UPS, 10U Rack/Tower, 208/120V NEMA outlets
MODEL NUMBER: SU10000RT3U2TF
Description
Highlights
10kVA / 10,000VA / 9000W
on-line double-conversion UPS;
0.9 power factor
208/120V 60Hz output; High
efficiency economy mode option
10U Rack/Tower compatible;
Hot-swappable power and
battery modules
USB, RS232 & EPO ports;
support for SNMP/WEB and
contact-closure card options
Front panel LEDs with detailed
LCD monitoring and control
screen
Expandable runtime with optional
external battery packs
Hardwire input (3 wire); L6-30R,
L6-20R & 5-15/20R outlets
Tripp Lite SU10000RT3U2TF 10,000VA / 10kVA / 9000 watt online, double-conversion UPS system offers
complete power protection for critical network applications. This system delivers online, double-conversion UPS
protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass
prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable
PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no
interruption to connected equipment. Enhanced availability, fault tolerance and simple hot-swap replacement
options make this UPS ideal for advanced networking applications in data centers, computer rooms, network
closets and rugged industrial locations.
Package Includes
SU10000RT3UPM 3U UPS
power module
BP240V10RT3U external battery
pack
Two SU5000XFMRT2U step
down transformers
SUPDMB710 Detachable PDU
Features
with manual bypass switch
Four post compatible rack rail kit
Tripp Lite SU10000RT3U2TF 10kVA / 10,000VA / 9000 watt on-line, double-conversion UPS system in 10U
(4 sets)
total rack/tower configuration (3U UPS power module, 3U external battery pack and two 2U step-down
Tower stands for upright tower
transformers)
configuration
Detachable PDU with manual bypass switch enables hot-swappable UPS power module replacement with no
PowerAlert software, complete
interruption in output power to connected networking equipment
data cabling and user manual
Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
Hardwire input; 2 L6-30R, 4 L6-20R and 24 5-15/20R outlets
Maximum installed rack depth of only 32.5 in. / 82.6cm
Full-time active power conditioning provides clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise
Double-conversion operation converts raw input from AC to DC, then resynthesizes output power back to perfect sine wave AC with enhanced protection
from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
Maintains full-time sine wave output within 2% of 208/120V nominal at 60Hz during brownouts as low 100V and overvoltages as high as 300V
Expandable runtime is supported with optional BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH
external battery packs
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
1/7