STR4 Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – DC Advanced Microstep Drive

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
STR4
DC Advanced Microstep Drive
1pc. - 190.00
50pc. - 142.50
Product Features
Current range 1.12A to 4.5A peak of sine
Electronic damping (anti-resonance)
Microstepping & microstep emulation
Built-in self test move profile
Step & direction inputs
CW Pulse/CCW pulse operation
Idle current reduction
Selectable digital input filter
Description
The STR4 stepper drive is a compact, powerful, digital step & direction drive, great for OEM applications requiring
basic step & direction control of a 2-phase step motor. The STR4 outputs up to 4.5 A/phase to the step motor, and
is compatible with a variety of 2-phase step motors that have been selected to optimize performance of both the
drive and motor.
The STR4 drive features advanced microstepping performance and sophisticated current control with anti-
resonance. Anti-resonance electronically damps motor and system resonances, which improves motor
smoothness and torque over a wide speed range.
Each STR4 step motor drive operates in either Step & Direction or Pulse/Pulse control mode. Selecting between
these two modes is done by moving a jumper located under the cover of the drive. Each STR4 drive can microstep
up to 20,000 steps/rev with a 1.8º step motor (1/100 step), and can even microstep the step motor when the
command pulses are low resolution. This feature is called Microstep Emulation. All drive setup is done via dip
switches and a rotary switch on the side of the drive, including motor selection, running current, idle current, and
step resolution.