SNMPWEBCARD Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – For remote monitoring and control via SNMP, Web or Telnet

For remote monitoring and control via SNMP, Web
or Telnet
MODEL NUMBER: SNMPWEBCARD
Description
Tripp Lite's SNMPWEBCARD allows network users to operate any expansion slot-equipped Tripp Lite SmartPro
or SmartOnline UPS as a managed device on the network. Enables remote monitoring and control of UPS and
site electrical conditions using the SNMP network management platform or a web browser. Provides remote
viewing of site electrical data, UPS status information and self-test logs. Supports selective rebooting of locked
network equipment without disrupting power to other devices when used with customized load management
receptacles available on select Tripp Lite UPS systems. Optional ENVIROSENSE module provides remote
temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom
devices. NEW firmware web-only version 12.06.0061 now available! - supports IPv6, Radius, and secure file
transfer. Firmware is not applicable with cards running firmware version 12.04.0047 or earlier. NOTE: Existing
12.04.0048 and 12.04.0049 cards must be upgraded to the 12.04.0055 firmware prior to upgrading to
12.06.0061.
Features
NEW firmware web-only version 12.06.0061 now available! – supports IPv6, SNMPv3, and secure file transfer
Graphical User Interface supports Java 1.6 and 1.7 runtime environments
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Makes any slot-equipped Tripp Lite UPS a managed device on the network, controllable using SNMP network
management platforms or a web browser
Web interface provides remote viewing of current site electrical data, UPS self-test and alert logs, as well as
logged power events such as blackouts, brownouts, overvoltages, and other electrical problems
Offers the ability to control UPS output power and remote reboot of locked network devices without
interrupting power to other loads when used with any Tripp Lite UPS equipped with load management
receptacles
DHCP/Manual configuration support provides the ability to have network settings automatically assigned to
the card, or manually assigned via permanent IP addresses
10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T
1/3
Highlights
NEW firmware web-only version
12.06.0061 now available!
Supports secure file transfer
Supports SNMPv3, including
SNMPv3 traps
Java 6 and 7 WebUI support
Improved performance
Supports IPv6
RADIUS Support (FreeRADIUS,
TekRADIUS)
Data and event logs can be
setup to automatically send the
log via email or HTTP post when
the configurable log size
(64-2048) is reached
Enhanced Remote Syslog
capability to define if event, data
or accounting entries should be
sent
CLI interface that allows control
and configuration through a
network CLI interface, SSH or
Telnet, or through a
SNMPWEBCARD's serial
configuration port
Event actions
Individual outlet events
Applications
Ideal for remote management
and control of UPS and power
data in LAN/WAN racks,
computer rooms and data center
environments
System Requirements
Tripp Lite UPS/PDU with
SNMPWEBCARD running
Version 12.04.0055
FTP utility
Web browser
Jave Runtime Environment
1.6.026 or later
NOTE: Existing 12.04.0048 and