SMLJ5.0 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Transient Voltage Suppressor

SMLJ5.0 thru SMLJ170CA
Transient Voltage Suppressor
Breakdown Voltage 5.0 to 170 Volts
Peak Pulse Power 3000 Watts
CASE: SMC (DO214AB)
E
Dimensions in inches and (millimeters)
Features
 Breakdown Voltages (V_BR) from 5.0 to 170V
 3000W peak pulse power capability with a 10/1000μs
waveform, repetitive rate (duty cycle):0.01%
 Fast Response Time
 Low incremental surge resistance
 Excellent clamping capability
 Available in uni-directional and bi-directional
 High temperature soldering guaranteed: 265℃ /10
seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg)
tension
Application
 Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on IC_S, MOSFE, signal lines of sensor units for
consumer, computer, industrial, automotive and
telecommunication
Mechanical Data
 Case: Void-free transfer molded thermosetting epoxy
body meeting UL94V-O
 Terminals: Tin-Lead or ROHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-750,
Method 2026
 Marking: Body marked with part number
 Polarity: Cathode indicated by band
 Weight: 0.21g（Approximately）
Maximum Ratings and Electrical Characteristics @ 25^OC unless otherwise specified
Symbol
Conditions
Value
P_PPM Peak pulse power capability with a 10/1000μs
3000
I_PPM
P_M(AV)
Peak pulse current with a 10/1000μs
Steady state power at T_L =45℃ 0.375”(10mm) from body
Steady state power at T_A=25℃ when mounted on FR4 PC board with
recommended footprint
SEE TABLE1
6.0
1.61
I_FSM Peak forward surge current,8.3ms single half sine-wave unidirectional only
200
V_F
Maximum instantaneous forward voltage at 100A for unidirectional only
3.5
R_θJL Thermal resistance junction to lead
17.5
R_θJA Thermal resistance junction to ambient
77.5
T_J, T_STG Operating and Storage Temperature
-65 to +150
Unit
W
A
W
W
A
V
℃/W
℃/W
℃
Document Number: SMLJ5.0 thru SMLJ170CA
Feb.29,2012
1
www.smsemi.com