SMH Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85C
@Endurance with ripple current : 2,000 hours at 85C
@Non solvent-proof type
@RoHS Compliant
SMM
Downsized
Longer life
SMH
?SPACIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +85C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
6.3 to 100Vdc
P20% (M)
(at 20C, 120Hz)
I=0.02CV or 3mA, whichever is smaller.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 5 minutes)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
tanE (Max.)
0.60 0.50 0.40 0.30 0.25 0.20 0.15 0.15 0.15
(at 20C, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 80V 100V
Z(-25C)/Z(+20C)
444332222
Z(-40C)/Z(+20C)
15 15 15 10 8 6 6 5 5
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 2,000 hours at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[150% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : VS (F22 to F35) : Standard
Sleeve (PET : Black)
Negative mark
PC board pin-out
10
@Terminal Code : LI (F35)
Sleeve (PET : Black)
Negative mark
PC board pin-out
2-1.2B6
Vent
*
LP2
4.0P0.5
*FD=35mm : 3.5P0.5mm
No plastic disk is the standard design
2-F2
Vent
LP2
4.5P1
5P0.5
14.2P1
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E SMH AAA V S N AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 820MF:821, 3,300MF:332)
Dummy terminal code
Terminal code
Voltage code (ex. 6.3V:6R3, 63V:630, 100V:101)
Series code
Category
Please refer to "A guide to global code (snap-in type)"
(1/3)
CAT. No. E1001F