SMART1200XLHG Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – SmartPro Medical Grade 1kVA 120V Line interactive Tower UPS with Extended-run, full isolation, USB & Serial ports

SmartPro Medical Grade 1kVA 120V Line interactive
Tower UPS with Extended-run, full isolation, USB &
Serial ports
MODEL NUMBER: SMART1200XLHG
Highlights
1000VA / 1kVA line interactive,
extended run tower UPS
Maintains 120V nominal output
over an input range of 81 to 143V
Professional features include
serial port, hospital grade plug &
outlets, built-in isolation
transformer and UL 60601-1
listing
Input: Hospital-grade NEMA
5-15P (120V 15A) / Output: 4
Hospital-grade NEMA 5-15R
(120V)
Reduce cumulative shock
potential to less than
100microamps
Package Includes
Description
Tripp Lite's SMART 1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage
regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability. UL
60601-1 listed as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line
isolation and removes common mode noise while maintaining full AC surge suppression in all modes less than
SMART 1200XLHG Medical
Grade Tower UPS System
PowerAlert Software and cabling
Warranty information
Instruction manual
100 microamps. Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports
computers, inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to
several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line
interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use
only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9) that work with included PowerAlert
Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
Features
Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all
modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible);
BP36V27-2US (multi-pack compatible)
Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery
power
Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
Supports loads up to 1000VA/750W
1/6