SMAJ5913 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Transient Voltage Suppressor

SMAJ5913 thru SMAJ5936
Transient Voltage Suppressor
Breakdown Voltage 3.3 to 30 Volts
CASE: SMA (DO214AC)
Features
 Extensive Voltages selection from 3.3 to 30V
 Silicon 3.0 Watt Zener Diodes
 Ideal for high-density and low-profile mounting
 Regulates voltage over a broad operating current
and temperature range
 Flexible axial-lead mounting terminals
印无效 _{Dimensions in inches and (millimeters)}
 High specified maximum current(I_ZM) when
adequately heat sinking
A^ pplication
 Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on IC_S, MOSFE, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication
Mechanical Data
 Case: Void-free transfer molded thermosetting epoxy
body meeting UL94V-O
 Terminals: Tin-Lead or ROHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-750,
Method 2026
 Marking: Body marked with part number
 Polarity: Cathode indicated by band
 Weight: 0.3g（Approximately）
打 ^{Maximum Ratings and Electrical Characteristics @ 25OC unless otherwise specified}
Symbol
Conditions
Value
Unit
P_M(AV)
Steady state power at T_L ≤ 105℃ 0.375”(10mm) from body
Steady state power at T_A=25℃ when mounted on FR4 PC described for
thermal resistance (also see Fig.1)
3.0
W
1.56
W
V_F
R_θJL
R_θJA
T_J, T_STG
Maximum instantaneous forward voltage at 200mA
Thermal resistance junction to lead
Thermal resistance junction to ambient
Operating and Storage Temperature
1.2
15
80
-65 to +150
V
℃/W
℃/W
℃
Document Number: SMAJ5913 thru SMAJ5936
Feb.29, 2012
1
www.smsemi.com