SM02B-SURS-TF Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 0.8mm pitch/Disconnectable Insulation displacement connectors

SUR CONNECTOR
Emboss Tape
0.8mm pitch/Disconnectable Insulation displacement connectors
The world's first 0.8mm pitch wire-to-board
insulation displacement connector. Side
entry type is only 3.9mm depth and
1.75mm height after mounting on the PC
board, and top entry type is only 2.2mm
depth and 3.9mm height.
Compared to the conventional 1.0mm pitch
SSR connector, occupation space on the
board is reduced by 34% (side entry type).
• 3-point grip construction
• Super fine wires are applicable
• Shrouded header
• Twin U-slot insulation displacement section
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC (AWG #32)
0.2A AC, DC (AWG #36)
• Voltage rating: 30V DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 20m Ω max.
After environmental testing/ 40m Ω max.
• Insulation resistance: 100M Ω min.
• Withstanding voltage: 200V AC/minute
• Applicable wire: Conductor size/ AWG #32, #36
Conductor/ 7 strands,
tin-coated copper alloy
Insulation O.D./ 0.39mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
Top entry type


)FBEFS

PVUMJOF
 ^ʶ
 ^ʶ
Side entry type

 ^ʶ
 ^ʶ
^ʶ
^ʶ
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: ±0.05mm for all centers.
3. Dimensions above should serve as a guideline. Contact JST for details.
1
)FBEFS
PVUMJOF
 ^ʶ
 ^ʶ