|
SHHD003A0A Datasheet, PDF (1/16 Pages) List of Unclassifed Manufacturers – SHHD003A0A Hammerhead* Series; DC-DC Converter Power Modules 18-75Vdc Input; 5.0Vdc, 3A, 15W Output | |||
|
GE
Data Sheet
SHHD003A0A Hammerhead* Series; DC-DC Converter Power Modules
18-75Vdc Input; 5.0Vdc, 3A, 15W Output
Features
ï· Compliant to RoHS II EU âDirective 2011/65/EU (-Z versions)
ï· Compliant to REACH Directive (EC) No 1907/2006
ï· Ultra-wide Input Voltage Range, 18Vdc to 75Vdc
ï· No minimum load
ï· High efficiency â 87.0% at full load (Vin=24 or 48Vdc)
ï· Constant switching frequency
ï· Low output ripple and noise
RoHS Compliant ï·
Applications
ï·
ï· Wireless Networks
ï·
ï· Hybrid power architectures
ï·
ï· Optical and Access Network Equipment
ï·
ï· Enterprise Networks including Power over Ethernet (PoE) ï·
ï· Industrial markets
ï·
Small Size and low profile, follows industry standard 1x1
footprint
27.9mm x 24.4mm x 8.5mm (MAX)
(1.10 x 0.96 x 0.335 in)
Surface mount (SMT) or Through hole (TH)
Reflow process compliant, both SMT and TH versions
Positive Remote On/Off logic
Output overcurrent/voltage protection (hiccup)
Over-temperature protection
Output Voltage adjust: 90% to 110% of Vo,nom
Options
ï· Negative Remote On/Off logic
ï· Surface Mount/Tape and Reel (-SR Suffix)
ï· Wide operating temperature range (-40°C to 85°C)
ï· CAN/CSAâ C22.2 No. 60950-1-07, 2nd Edition + A1:2011
(MOD), ANSI/UL# 60950-1-2011, December 19, 2011; DIN EN
60950-1 (VDEâ¡ 0805-1):2011-01 DIN EN 60950-1/A12 (VDE
0805-1/A12):2011-08 EN 60950-1:2006 + A11:2009 +
A1:2010 + A12:2011 IEC 60950-1:2005 (2nd Edition);
am1:2009
ï· CE mark meets 2006/95/EC directive§
ï· Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
ï· 2250 Vdc Isolation tested in compliance with IEEE 802.3¤ PoE
standards
Description
ï· ISO** 9001 and ISO 14001 certified manufacturing facilities
The SHHD003A0A Hammerhead series power modules are isolated dc-dc converters that operate over an ultra-wide input voltage
range of 18 Vdc -75Vdc and provide a single precisely regulated output voltage at 5.0Vdc. This series is a low cost, smaller size
alternative to the existing LW/LAW/LC/SC/SW with enhanced performance parameters. The output is fully isolated from the input,
allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency of 87.0% typical at full
load. Built-in filtering for both input and output minimizes the need for external filtering. The module is fully self-protected with
output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional features include
negative or positive on/off logic and SMT connections.
* Trademark of General Electric Company
# UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.
June 26, 2013
©2012 General Electric Company. All rights reserved.
Page 1
|
▷ |