|
SHDR-30V-S-B Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 1.0mm pitch/Disconnectable Crimp style connectors | |||
|
SHD CONNECTOR
Emboss Tape
1.0mm pitch/Disconnectable Crimp style connectors
11
21
31
39
The SHD connector is compact with a
mounting height of 6.3mm for top entry
type and 5.5mm for side entry type, and a
width of 5.0mm for top entry type and
5.1mm for side entry type.
⢠Compact, low profile design
⢠Anti-misinsertion feature
⢠Receptacles with protrusions
⢠Header designed for vacuum pick and place robotics
Specifications âââââââââââââââââââ
⢠Current rating: 1.0A AC, DC (AWG #28)
⢠Voltage rating: 50V AC, DC
⢠Temperature range: -25ËC to +85ËC
(including temperature rise in applying
electrical current)
⢠Contact resistance: Initial value/20m ⦠max.
After environmental testing/40m ⦠max.
⢠Insulation resistance: 100M ⦠min.
⢠Withstanding voltage: 500V AC/minute
⢠Applicable wire: Conductor size/AWG #32 to #28
Insulation O.D./0.4 to 0.8mm
* RoHS compliant products are published.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ââââââââââââââââââââââ
0 Recognized E60389
1Certified LR20812
PC board layout (viewed from component side) and Assembly layout
Top entry type
Side entry type
ʶ
ʶ ʶ
Circuit No.1
Header outline
Top entry type
with a boss
ʶ
ʶ ʶ
Circuit No.1
Header outline
ʶ
ʶ ʶ
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
Note: 2. The dimensions above should serve as a guideline. Contact JST for details.
ʶ
ÐÊ´
Circuit No.1
Header outline
Contact
Model No.
SSH-003GA-P0.2
mm2
Ê
Applicable wire
Q'ty /
AWG# Insulation O.D. (mm) reel
Ê
Ê
Material and Finish
Phosphor bronze, nickel-undercoated, Mating part; gold-plated
RoHS compliance
Note: Contact JST for tin-plated products.
$POUBDU
$SJNQJOH
"QQMJDBUPS
NBDIJOF $SJNQBQQMJDBUPS
%JFT
$SJNQBQQMJDBUPSXJUIEJFT
SSH-003GA-P0.2 AP-K2N
MKS-L-10-3
MKS-SC
MK/SSH/L-003-02 APLMK SSH/L003-02
SC/SSH/L-003-02 APLSC SSH/L003-02
Note: *Strip-crimp applicator
Contact JST for applicable wires in case that it is not usable due to wire size.
4
|
▷ |