|
SEU06464H1CF1SA-30R Datasheet, PDF (1/14 Pages) List of Unclassifed Manufacturers – 512MB DDR2 – SDRAM DIMM | |||
|
Data Sheet
Rev.1.1 18.11.2010
512MB DDR2 â SDRAM DIMM
240 Pin UDIMM
SEU06464H1CF1SA-25R
512MB PC2-6400 in FBGA Technology
RoHS compliant
Options:
ï§ Data Rate / Latency
Marking
DDR2 800 MT/s CL6
-25
DDR2 667 MT/s CL5
-30
ï§ Module Density
512MB with 4 dies and 1 rank
ï§ Standard Grade
Grade E
Grade W
(tA) 0°C to 70°C
(tc) 0°C to 85°C
(tA) 0°C to 85°C
(tc) 0°C to 95°C *)
(tA) -40°C to 85°C
(tc) -40°C to 95°C *)
*) The refresh rate has to be doubled when 85°C<TC<95°C
Environmental Requirements:
ï§ Operating temperature (ambient)
standard Grade
0°C to 70°C
ï§ Operating Humidity
10% to 90% relative humidity, noncondensing
ï§ Operating Pressure
105 to 69 kPa (up to 10000 ft.)
ï§ Storage Temperature
-55°C to 100°C
ï§ Storage Humidity
5% to 95% relative humidity, noncondensing
ï§ Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
ï§ 240-pin 64-bit DDR2 Dual-In-Line Double Data Rate
synchronous DRAM Module
ï§ Module organization: single rank 64M x 64
ï§ VDD = 1.8V ±0.1V, VDDQ 1.8V ±0.1V
ï§ 1.8V I/O ( SSTL_18 compatible)
ï§ Serial Presence Detect (SPD) EEPROM
ï§ Gold-contact pad
ï§ This module is fully pin and functional compatible to the
JEDEC PC2-6400 spec. and JEDEC- Standard MO-237.
(see www.jedec.org)
ï§ The pcb and all components are manufactured according
to the RoHS compliance specification
[EU Directive 2002/95/EC Restriction of Hazardous
Substances (RoHS)]
ï§ DDR2 - SDRAM component Samsung
K4T1G164QF-BCF7
ï§ 64Mx16 DDR2 SDRAM in FBGA-84 package
ï§ Four bit prefetch architecture
ï§ DLL to align DQ and DQS transitions with CK
ï§ Eight internal device banks for concurrent operation
ï§ Programmable CAS latency (CL)
ï§ Posted CAS additive latency (AL)
ï§ WRITE latency = READ latency â 1 tCK
ï§ Programmable burst length: 4 or 8
ï§ Adjustable data-output drive strength
ï§ On-die termination (ODT)
Figure: mechanical dimensions1
1if no tolerances specified ± 0.15mm
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Fon: +41 (0) 71 913 03 03
Fax: +41 (0) 71 913 03 15
www.swissbit.com
eMail: info@swissbit.com
Page 1
of 14
|
▷ |