SDU01G64H3BJ2SA-50R Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – 1024MB DDR . unbuffered DDR1 UDIMM

Data Sheet
Rev.1.0 18.09.2012
1024MB DDR – unbuffered DDR1 UDIMM
Features:
184PIN UDIMM
SDU01G64H3BJ2SA-xxR
1GByte in TSOP Technology
RoHS compliant
Options:
 Data Rate / Latency
DDR 400 MT/s CL3
DDR 333 MT/s CL2.5
Marking
-50
-60
 Module density
1024MB with 16 dies and 2 ranks
 184-pin 64-bit unbuffered Dual-In-Line Double
Data Rate Synchronous DRAM module
 Module organization: dual rank 128M x 64
 VDD = 2.5V ±0.2V, VDDQ 2.5V ±0.2V
 VDD = 2.6V ±0.1V, VDDQ 2.6V ±0.1V (DDR400)
 2.5V I/O ( SSTL_2 compatible)
 Serial Presence Detect with EEPROM
 Gold-contact pads
 This module is fully pin and functional compatible
to the JEDEC PC-3200 spec. and JEDEC-
Standard MO-206. (see www.jedec.org)
 The pcb and all components are manufactured
according to the RoHS compliance specification
[EU Directive 2002/95/EC Restriction of
Hazardous Substances (RoHS)]
Standard Grade (T_A)
0°C to 70°C
 DDR-SDRAM component base: Samsung
K4H510838J DIE rev. J
 64Mx8 DDR1 SDRAM in TSOP66 package
 Internal, pipelined double-data-rate (DDR)
 2n pre-fetch architecture
 DLL to align DQ and DQS transitions with CK
 Bidirectional data strobe (DQS)
Environmental Requirements:
transmitted/received with data, source-
 Operating temperature (TA)
Standard Grade
0°C to 70°C
 Operating Humidity
10% to 90% relative humidity, noncondensing
 Operating Pressure
105 to 69 kPa (up to 10000 ft.)
 Storage Temperature
-55°C to 100°C
 Storage Humidity
5% to 95% relative humidity, noncondensing
 Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
synchronous data capture
 Differential clock inputs (CK and CK#)
 Commands entered on each positive CK edge
 Four internal banks for concurrent operation
 Data mask (DM) for masking write data
 Programmable burst length: 2,4 or 8
 Adjustable data-output drive strength
 Auto Refresh (CBR) and Self Refresh, 8k
Refresh every 64ms
Figure:

mechanical
dimensions¹
5.250 ( 133.35 )
.080 ( 2.03 ) R
.080 ( 2.03 ) R
.049 ( 1.25 ) R
.096 ( 2.45 )
PIN 1 ( PIN 93 on
Backside )
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
2.893 ( 73.50 )
4.744 ( 120.50 )
1_{if no tolerances specified ± 0.15mm}
Fon: [phone]
Fax: [phone]
www.swissbit.com
eMail: [e-mail]
PIN 92 ( PIN 184 on
Backside )
Page 1
of 13