SDR12872D1B62MT-50R Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – 1GB DDR – SDRAM registered DIMM

Data Sheet
Rev.1.0 22.05.2008
1GB DDR – SDRAM registered DIMM
184Pin ECC Registered DIMM
SDR12872D1B62MT-50R
1GB PC 3200 in FBGA Technique
RoHS compliant
Options:
Frequency / Latency
DDR400 MHz CL3
DDR 333 MHz CL2,5
Marking
-50
-60
Module densities
1024MB with 18 dies and 2 ranks
Standard Grade
T_ambient 0°C to 70°C
Environmental Requirements:
Operating temperature (ambient)
Standard Grade
0°C to 70°C
Operating Humidity
10% to 90% relative humidity, noncondensing
Operating Pressure
105 to 69 kPa (up to 10000 ft.)
Storage Temperature
-55°C to 100°C
Storage Humidity
5% to 95% relative humidity, noncondensing
Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
184-pin 72-bit Dual-In-Line module.
Double Date Rate synchronous DRAM
Module for server applications
DDR-SDRAM component base: MICRON
MT46V64M8P-5B-F
V_DD 2.5V ±0.2V, V_DDQ 2.5V ±0.2V
Registered Inputs with one-clock delay
Phase-lock loop (PLL) clock driver to reduce
loading
Supports ECC error detection and correction
Programmable CAS Latency, Burst Length
and Wrap Sequence
Auto Refresh (CBR) and Self Refresh
Posted CAS by programmable additive
latency for better command and data bus
efficiency
2.5V I/O ( SSTL_2 compatible)
Serial Presence Detect with EEPROM
Gold-contact pad
This module family is fully pin and functional
compatible to the JEDEC DDR1 spec.
The pcb and all components are
manufactured according to the RoHS
compliance specification
[EU Directive 2002/95/EC Restriction of
Hazardous Substances (RoHS)]
Swissbit Germany AG
Wolfener Straße 36
D-12681 Berlin
Figure: mechanical dimensions
Fon: [phone] - 0
Fax: [phone] - 55
www.swissbit.com
eMail: [e-mail]
Page 1
of 13