SDN06464K1BF1MT-50 Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – 512MB DDR1 – SDRAM SO-DIMM

Data Sheet
Rev.1.0 30.05.2012
512MB DDR1 – SDRAM SO-DIMM
200 PIN SO-DIMM
SDN06464K1BF1MT-50R
512MB DDR PC3200
TSOP Technology
RoHS compliant
Options:
 Frequency / Latency
DDR 400 MHz CL3
DDR 333 MHz CL2.5
Marking
-50
-60
 Module densities
512MB with 8 dies and 1 rank

Standard Grade (TA)
0°C to 70°C
Grade E
(TA)
0°C to 85°C
Grade I
(TA)
-25°C to 85°C
Grade W
(TA)
-40°C to 85°C
Environmental Requirements:
 Operating temperature (ambient)
Standard Grade
0°C to 70°C
Grade E
0°C to 85°C*
Grade I
-25°C to 85°C*
Grade W
-40°C to 85°C*
Operating Humidity
10% to 90% relative humidity, noncondensing
 Operating Pressure
105 to 69 kPa (up to 10000 ft.)
 Storage Temperature
-55°C to 100°C
 Storage Humidity
5% to 95% relative humidity, noncondensing
 Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
 20^F0^e-p^ai^tn^ur6^e4^s-b^: it Small Outline, Dual-In-Line Double
Data2R0a0t-episny6n4ch-broitnSomusalDl ORuAtMlinMe oDduualle-In-Line.
 DDR D- oSuDbRleADMacteomRaptoenseynnt cbharsoenMouicsroDnRAM
MT46MV6o4dMule8Pfo-5r Binduiestrreiavl.:aFpplications
 V_D_D =D2D.5RV-S±D0R.2AVM, Vc_Do_Dm_Qp2o.n5eVnt±b0a.2sVe: MICRON
 Auto MRTef4r6eVsh64(CMB8RT3) 7aZnd Self Refresh 8k Refresh
everyV6_D4_Dm2.s5V ±0.2V, V_DDQ 2.5V ±0.2V
 2.5V PI/rOog(rSamSTmLa_b2le5 CcoAmSpLaatitbelnec) y, Burst Length
 Seriaal nPdreWseranpceSDeqeuteecntcweith EEPROM
 Four AbuittoprRefeeftrcehshar(cChBitRec)tuarned Self Refresh
 DLL t8okaRligenfreDsQh eavnedryD6Q4Smtsransitions with CK
 Multip2l.e5VintI/eOrn(aSl dSeTvLic_e2 bcaonmkpsaftoibrlceo) ncurrent
operaSteiornial Presence Detect with EEPROM
 ProgrGaomldm-caobnletaCctApSaldatency (CL)
 PosteTdhiCsAmSoadudldeitfivaemlialyteisncfuyll(yApLi)n and functional
 WRITcEomlapteantibcyle=toRtEhAeDJElaDteEnCcyPC– 217t0_C0_K spec.
 PrograanmdmJEabDlEeCb-urSsttalnednagrthd:M4Oor2824.
 Adjus(tsaebelewdwawta.j-eoduetpcu.otrdgr)ive strength
 On-dTiehteerpmcbinantiodna(llOcDomT)ponents are
 Gold-mcoantuafcatcptuarded according to the RoHS
 This mcoomdpulieanfacme islypeisciffuicllaytpioin and functional
comp[EatUiblDeirteocJtiEvDe E2C00. 2/95/EC Restriction of
(seeHwawzawr.djeoduescS.ourbgs) tances (RoHS)]
 The pcb and all components are manufactured
according to the RoHS compliance specification
[EU Directive 2002/95/EC Restriction of Hazardous
Substances (RoHS)]
Figure 1: Mechanical Dimensions
Swissbit AG
Industriestrasse 4
CH – 9552 Bronschhofen
Fon: [phone]
Fax: [phone]
www.swissbit.com
eMail: [e-mail]
Page 1
of 13