|
SDN03264C1CF1MT-50 Datasheet, PDF (1/13 Pages) List of Unclassifed Manufacturers – 256MB DDR . SDRAM SoDIMM | |||
|
Data Sheet
Rev.1.0 30.05.2012
256MB DDR â SDRAM SoDIMM
200PIN SoDIMM
SDN03264C1CF1MT-xxR
256MByte in FBGA Technology
RoHS compliant
Options:
ï§ Data Rate / Latency
DDR 400 MT/s CL3
DDR 333 MT/s CL2.5
Marking
-50
-60
ï§ Module density
256MB with 4 dies and 1 rank
ï§ Standard Grade (TA)
Grade E
(TA)
Grade I
(TA)
Grade W
(TA)
0°C to 70°C
0°C to 85°C
-25°C to 85°C
-40°C to 85°C
*) The refresh rate has to be doubled when 85°C<TC<95°C
Environmental Requirements:
ï§ Operating temperature (TA)
Standard Grade
0°C to 70°C
E-Grade
0°C to 85°C
I-Grade
-25°C to 85°C
W-Grade
-40°C to 85°C
ï§ Operating Humidity
10% to 90% relative humidity, noncondensing
ï§ Operating Pressure
105 to 69 kPa (up to 10000 ft.)
ï§ Storage Temperature
-55°C to 100°C
ï§ Storage Humidity
5% to 95% relative humidity, noncondensing
ï§ Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
ï§ 200-pin 64-bit Small Outline Dual-In-Line
module.
Double Date Rate synchronous DRAM
Module for industrial applications
ï§ DDR-SDRAM component base: Micron
MT46V32M16BN-6:F BGA
ï§ VDD 2.5V ±0.2V, VDDQ 2.5V ±0.2V
ï§ Programmable CAS Latency, Burst Length
and Wrap Sequence
ï§ Auto Refresh (CBR) and Self Refresh
ï§ 8k Refresh every 64ms
ï§ 2.5V I/O ( SSTL_2 compatible)
ï§ Serial Presence Detect with EEPROM
ï§ Gold-contact pad
ï§ This module family is fully pin and functional
compatible to the JEDEC PC3200 spec.
and JEDEC- Standard MO 224.
(see www.jedec.org)
ï§ The pcb and all components are
manufactured according to the RoHS
compliance specification
[EU Directive 2002/95/EC Restriction of
Hazardous Substances (RoHS)]
Figure: mechanical dimensions1
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Fon: +41 (0) 71 913 03 03
Fax: +41 (0) 71 913 03 15
1if no tolerances specified ± 0.15mm
www.swissbit.com
eMail: info@swissbit.com
Page 1
of 13
|
▷ |