SDN01G64D1BJ2SA-50 Datasheet, PDF (1/14 Pages) List of Unclassifed Manufacturers – 1024MB DDR SDRAM SoDIMM

Data Sheet
Rev.1.1 24.01.2013
1024MB DDR SDRAM SoDIMM
200 PIN SO-DIMM
SDN01G64D1BJ2SA-xxR
1GByte in FBGA Technology
RoHS compliant
Options:
 Data Rate / Latency
DDR 400 MT/s CL3
DDR 333 MT/s CL2.5
Marking
-50
-60
 Module density
1GByte with 16 dies and 2 rank
 Standard Grade (T_A)
E-Grade
(T_A)
I-Grade
(T_A)
W-Grade
(T_A)
0°C to 70°C
0°C to 85°C
-25°C to 85°C
-40°C to 85°C
*) The refresh rate has to be doubled when 85°C<TC<95°C*)
Environmental Requirements:
 Operating temperature (ambient)
Standard Grade
0°C to 70°C
E-Grade
0°C to 85°C
I-Grade
-25°C to 85°C
W-Grade
-40°C to 85°C
 Operating Humidity
10% to 90% relative humidity, noncondensing
 Operating Pressure
105 to 69 kPa (up to 10000 ft.)
 Storage Temperature
-55°C to 100°C
 Storage Humidity
5% to 95% relative humidity, noncondensing
 Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
 200-pin 64-bit DDR1 Small Outline Dual-In-Line Double
Data Rate Synchronous DRAM module
 Module organization: dual rank128M x 64
 VDD = 2.5V ±0.2V, VDDQ 2.5V ±0.2V
 VDD = 2.6V ±0.1V, VDDQ 2.6V ±0.1V (DDR400)
 2.5V I/O ( SSTL_2 compatible)
 Serial Presence Detect with EEPROM
 Gold-contact pads
 This module is fully pin and functional compatible to the
JEDEC PC-3200 spec. and JEDEC- Standard MO-224.
(see www.jedec.org)
 The pcb and all components are manufactured according
to the RoHS compliance specification [EU Directive
2002/95/EC Restriction of Hazardous Substances (RoHS)]
 DDR1 - SDRAM component Samsung K4H510838J
 64Mx8 DDR1 SDRAM in 60-ball FBGA package
 Internal, pipelined double-data-rate (DDR)
 2n pre-fetch architecture
 DLL to align DQ and DQS transitions with CK
 Bidirectional data strobe (DQS) transmitted/received with
data, source-synchronous data capture
 Differential clock inputs (CK and CK#)
 Commands entered on each positive CK edge
 Four internal banks for concurrent operation
 Data mask (DM) for masking write data
 Programmable burst length: 2,4 or 8
 Adjustable data-output drive strength
 Auto Refresh (CBR) and Self Refresh, 8k Refresh every
64ms
Figure: mechanical dimensions¹
Swissbit AG
Industriestrasse 4
CH – 9552 Bronschhofen
Fon: [phone]
Fax: [phone]
1_{if no tolerances specified ± 0.15mm}
www.swissbit.com
email: [e-mail]
Page 1
of 14