SDM-USB-QS-S Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – SDM-USB-QS-S USB MODULE DATA GUIDE

INTERFACE MODULE
QS SERIES
WIRELESS MADE SIMPLE ^®
SDM-USB-QS-S USB MODULE DATA GUIDE
DESCRIPTION
The Linx QS Series USB module allows the
rapid addition of USB to virtually any device.
0.812"
Housed in a compact SMD package, the QS
module provides a complete solution for
converting between USB and CMOS / TTL logic
level serial sources. The module can be directly
0.630" ^{USB MODULE}
SDM-USB-QS-S
connected to virtually any serial device
LOT 10000
including microprocessors, RS-232 / RS-485
level converters, or Linx wireless RF modules.
The QS module is completely self contained, so
it requires no external components, (except a _0.125"
USB jack) and includes all necessary firmware
and drivers, freeing the designer from
complicated programming. Power can be ^{Figure 1: Package Dimensions}
supplied externally or from the USB bus. Both
USB 1.1 and USB 2.0 are supported at data rates up to 3Mbps.
FEATURES
„ Single chip USB-to-asynchronous
serial data conversion
„ Low cost
„ 3Mbps baud rate
„ Supports low-speed USB
„ Full handshaking support for RS-232
and RS-485
„ Bus- or self-powered
„ VID, PID, serial number, and
descriptors programmed via USB
„ No external components needed
(except a USB jack)
„ Compact surface-mount package
„ Drivers and firmware included
„ Supports Windows 98/2000/ME/XP
„ USB 1.1 and 2.0 compatible
APPLICATIONS INCLUDE
„ Interface / Upgrade Legacy Peripherals
„ Interfacing Microcontrollers To USB
„ USB to RS-232 / RS-485 Converters
„ Interfacing RF Modules To USB
„ USB Smart Card Readers
„ USB Modems
ORDERING INFORMATION
„ Robotics
PART #
DESCRIPTION
„ USB Instrumentation
„ USB Game Controllers
SDM-USB-QS-S
MDEV-USB-QS
USB Module
Master Development Kit
„ USB-to-Serial Converter Cables
Revised 1/28/08